Bad Ramer Jamer

Does the factory single pod come in the taupe color, or is it black. I'd rather not paint it if it's black. Are there any after market brand's that are the correct color. Are the the same quality.

Do you have to extend any of the wire's, like the one's going to the box if you mount on the A-pillar. How about the one's going to the sensor if your tapping into the hot line going to the cooler. Thank's

fredbert

The headliner and pillar covers of all third generation Rams (not sure about '06s) are the same color regardless of whether you have the taupe or dark slate gray interior. The factory SRT-10 A-pillar cover for my boost gauge matches perfectly.

Bad Ramer Jamer

Thank's Fred.

Anyone using a trani gauge there. Did you have to do anything to the wire's.

mattk50

mine is a perfect match i put my pyro there

RamWheelsBy4

I got a srt-10 a pillar still in the box in the garage. Decided to mount gauges in other places.

BigBlue

I didn't have to do anything with the wires for my isspro tranny gauge. I ran it from the tranny up the firewall, through the dash, and up to the very tip top of the a-pillar. I could use about another 1/2" of slack though but oh well.

Bad Ramer Jamer

Wished I seen this sooner. I all ready have one on the way. One good thing, I made buddies with a local part's guy and he's giving me everything I buy for 10% over. Good example is the winter front complete set with block cord and electric battery blanket's. Everywhere else said $179. He sold it to me for $144.

Bad Ramer Jamer

Thank's. That's what I wanted to hear.