CTD03

has any body ran these clutchs

i have been talking to them it seems that it will handle sled pulling and drag racing and towing yeah for me

i know every body will say go with south bend
i just want to see what people say about spec clutches

it sounds like to me its going to be a great clutch i just dont want to be a ginny pig

jwb600

well I went with something different to save money and it was a mistake. ppl say south bend for a reason. I bought a LUK for my 05 it was a waste of money. if I had bought a south bend to start with I would more and likely still own the truck

northernwheeler

I have a friend thats running one in his '07 5.9 and he says it is doing o.k. He doesn't sled pull or anything though.

CTD03

i have been talking to them they said they make it for the 1 1/4" and teh 1 3/8" shaft i may give them a try

o its not a cheap clutch its running around the same price as SBDD

wap

I think somebody around here is runnin a single maybe.

FWIW, I know you said every one here will say SBC, but just something to think about, if they are bout the same price, why be a guinee pig? Go ahead and use something proven. I am all for trying new stuff especially if it saves money but for the most part a clutch works or it doesnt. As in its not really gona "add" any performance. Know what I mean?

rustyshakelford

this is just my opinion, but if the money is the same, why not go w/ something that is tried and true. thats what i gathered from the posts on this thread! no need to reinvent the wheel if you know what i mean...haisley has a nice clutch too...see JD in not on southbends payroll

brett

CTD03

yeah i know what your guys are saying
i pretty much asnwered my own question on post #4