smoke switch
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: utah
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
smoke switch
i over heard a couple of guys talking about somthing you can put on your truck that tricks your trucks computer into beleiving that your under full boost thus over fueling injectors and causeing quite a beautiful seen of smoke. does anyone know anything about this?
#4
do you have a quad module on a CR 3rd gen? here is the tip for those who have one and want to play some more.
on the quad harness under the dash. find the red and dark blue wires, not the light blue(red is 5vdc power supply to the sensors, and the dark blue is the map sensor output to the ecm) install T taps. use a simple on/off switch. do not use one that requires 12vdc to energize an indicator light. get a 2 wire switch. connect the switch to each of the t taps.
turn on the switch and take off at WOT. you will get more smoke than just with the quad, not a huge cloud, but acceptable smoke until the turbo spools. you will get slightly faster spool due to the quicker fueling.
all this mod does is trick the ecm that you are at full boost(map) when you are really at low boost levels, and give max fuel. it does not increase fuel pressure, so no worries. i have run it for 2 months with no troubles or cel.
on the quad harness under the dash. find the red and dark blue wires, not the light blue(red is 5vdc power supply to the sensors, and the dark blue is the map sensor output to the ecm) install T taps. use a simple on/off switch. do not use one that requires 12vdc to energize an indicator light. get a 2 wire switch. connect the switch to each of the t taps.
turn on the switch and take off at WOT. you will get more smoke than just with the quad, not a huge cloud, but acceptable smoke until the turbo spools. you will get slightly faster spool due to the quicker fueling.
all this mod does is trick the ecm that you are at full boost(map) when you are really at low boost levels, and give max fuel. it does not increase fuel pressure, so no worries. i have run it for 2 months with no troubles or cel.
#6
Registered User
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes
on
0 Posts
do you have a quad module on a CR 3rd gen? here is the tip for those who have one and want to play some more.
on the quad harness under the dash. find the red and dark blue wires, not the light blue(red is 5vdc power supply to the sensors, and the dark blue is the map sensor output to the ecm) install T taps. use a simple on/off switch. do not use one that requires 12vdc to energize an indicator light. get a 2 wire switch. connect the switch to each of the t taps.
turn on the switch and take off at WOT. you will get more smoke than just with the quad, not a huge cloud, but acceptable smoke until the turbo spools. you will get slightly faster spool due to the quicker fueling.
all this mod does is trick the ecm that you are at full boost(map) when you are really at low boost levels, and give max fuel. it does not increase fuel pressure, so no worries. i have run it for 2 months with no troubles or cel.
on the quad harness under the dash. find the red and dark blue wires, not the light blue(red is 5vdc power supply to the sensors, and the dark blue is the map sensor output to the ecm) install T taps. use a simple on/off switch. do not use one that requires 12vdc to energize an indicator light. get a 2 wire switch. connect the switch to each of the t taps.
turn on the switch and take off at WOT. you will get more smoke than just with the quad, not a huge cloud, but acceptable smoke until the turbo spools. you will get slightly faster spool due to the quicker fueling.
all this mod does is trick the ecm that you are at full boost(map) when you are really at low boost levels, and give max fuel. it does not increase fuel pressure, so no worries. i have run it for 2 months with no troubles or cel.
#7
Not exactly true. It can be done on a stock truck. Bypass the the boost sensor part of the MAP and limit the voltage using a Zener diode. A nice little cloud of smoke and quicker turbo pooling in low boost conditions.
Trending Topics
#10
#11
Registered User
Join Date: Feb 2006
Location: stephenville, tx
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
doing this will probaly void yalls warantys, on yall boxes, im not going to jack with mine cause soon as i do something will hapen to the box and ill be screwed
#13
Banned
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes
on
0 Posts
In the words of Luken, Crazy Larry provides all the smoke anyone should need.
#15
Ok so i tried this little mod out last night and it worked, sorta. The smoke would roll and i was giddy, riding around blowing clouds, then i pulled back in the driveway to show my wife, popped it in neutral and hit it a little. The truck shot to 3600 rpms, and stayed there with my foot off the pedal for about 3 seconds. I tired it again and the same thing happened.
I shut the truck off, then later came back out and cranked it up. Had a CEL on and the code was p 0236. I backed out of the driveway, hit the pedal, almost no power, maybe 1/4 of its regular power. So i unplugged my new smoke mod, drove around a little, then the power came back after about 5 minutes. Hooked the wire back up, smokin again and running strong. I went to sleep happy.
This morning, no power, still has the CEL on. unplugged the wire, power comes back. Drive down the road, hook the wire back up, had smoke and power for about 3 minutes and then back to 1/4 power mode.
When the mod is turned on, my boost gauge reads 39 psi at idle, in fact, all the time. I thought this was weird but it could make sense, because all this mod does is fool the map sensor into thinking it has full boost....
Any ideas on whats going on?
I want smoke
I shut the truck off, then later came back out and cranked it up. Had a CEL on and the code was p 0236. I backed out of the driveway, hit the pedal, almost no power, maybe 1/4 of its regular power. So i unplugged my new smoke mod, drove around a little, then the power came back after about 5 minutes. Hooked the wire back up, smokin again and running strong. I went to sleep happy.
This morning, no power, still has the CEL on. unplugged the wire, power comes back. Drive down the road, hook the wire back up, had smoke and power for about 3 minutes and then back to 1/4 power mode.
When the mod is turned on, my boost gauge reads 39 psi at idle, in fact, all the time. I thought this was weird but it could make sense, because all this mod does is fool the map sensor into thinking it has full boost....
Any ideas on whats going on?
I want smoke