View Poll Results: which Smarty SW to run for Diesel thunder?
Beta 4.1
0
0%
Voters: 16. You may not vote on this poll
Which Smarty program to Run
#1
Banned
Thread Starter
Join Date: Jun 2004
Location: kingston,wa
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Which Smarty program to Run
Which one should I run for Diesel Thunder this saturday?
loaded is the aftermarket turbo, stock injectors, wild TQ Man. stacking with the quad race.
So, run with that, or load Beta 4.1,4.2,4.3,or 4.4?
dyno'd at christmas with same smarty program on 8, and quad cranked up. Recent mods have been CP3 mod and headstuds. Previous runs had boost set at 42 because of lack of studs. Not a problem now.
loaded is the aftermarket turbo, stock injectors, wild TQ Man. stacking with the quad race.
So, run with that, or load Beta 4.1,4.2,4.3,or 4.4?
dyno'd at christmas with same smarty program on 8, and quad cranked up. Recent mods have been CP3 mod and headstuds. Previous runs had boost set at 42 because of lack of studs. Not a problem now.
#3
Banned
Thread Starter
Join Date: Jun 2004
Location: kingston,wa
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
well beta 4.2 stacked with my quad ran hard enough to pop a freeze plug, dont want to try that again.. gonna set the boost around 50ish
quad has timing, pressure, and duration.
smarty will be even number if stacked.
quad has timing, pressure, and duration.
smarty will be even number if stacked.
#4
HTH's
Daniel
#7
Banned
Thread Starter
Join Date: Jun 2004
Location: kingston,wa
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
already popped my freeze plug on 4.2, the first 5 minutes i ran it. havent loaded it since. you pop one rye? i plated the rear one and nipped one of the barbells on the tstat. hopefully that's enough
Trending Topics
#9
DTR 1st Sergeant
OK-- I have to ask...
I have beta 4.3 and 4.4 and run the 4.4 everyday.
So can you explain why Bob recommended the 4.2? What is the difference with the 4.2 opposed to the other two?
I have beta 4.3 and 4.4 and run the 4.4 everyday.
So can you explain why Bob recommended the 4.2? What is the difference with the 4.2 opposed to the other two?
#10
Banned
Thread Starter
Join Date: Jun 2004
Location: kingston,wa
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
daniel, no boe kit, never received word that it is available, mike's a busy guy.
soule, 4.3 and .4 add pressure, 4.2 just ramps the pressure up earlier, cant safely stack .3 and .4 with a quad that adds pressure too.
soule, 4.3 and .4 add pressure, 4.2 just ramps the pressure up earlier, cant safely stack .3 and .4 with a quad that adds pressure too.
#11
I see, the plate "should" hold all you can throw at it right?
#14
Banned
Thread Starter
Join Date: Jun 2004
Location: kingston,wa
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
i think that rye is busting my chops becuase i blew the plug the night before the bd dyno day in may while testing the 4.2 . i believe that i let her have it before i was fully warmed up.
i havent heard of anyone popping one since. hopefully he is just giving me grief.
i havent heard of anyone popping one since. hopefully he is just giving me grief.
#15