Roebuck9

I was wondering on what everyone runs there smarty and mp8 on. Especially all us 305/555 guys your imput would help the most. Right now i believe my smarty program is the 411 and i run it on sw7. My mp8 will not arrive til friday and I cant wait to see what it will do!

JSCumms2000

you saw what it did to mine.... im sure you'll notice a difference.. esp w/ your mods..

kuhkuhkyle

I run 4.11 wild on SW9 and MP8 at 40% when i race. Around town i never run the MP8 and run 4.11 wild on SW3.

TXCTDSweetheart

I usually leave my Smarty on 9 and my MP-8 off or 30-40% around town and then turn it all the way up when I race. Works great with the Smarty

rip 112

I run the beta 4.4 on sw5 and the MP-8 about 50%, works awesome and definitely noticeable!

justin allan

I run beta 4.2 allways on sw9 and mp8 on 50%. I turn it all the way up for sled pullen or race.

Roebuck9

Where do you guys notice the most difference at and how much more will it smoke. It already looks like a train going through my small town! Also what else do I need to watch out for when i run it.

justin allan

my truck smokes like a SOB when mp8 is at 40% or higher. It also smokes alot cuz of the turbo lag from the 66. WOT there is just a haze. If you run it at 100% you may have to keep an eye in the rail preasure make sure it is not to high. 100% should be ok for short times. I will run mine at 75 to 80% some times for long time and the rail preasure seems to stay in check. You can really feel it when you turn it up while holding a constant speed. You will like it alot.

cscott

Not trying to derail the thread but I thought the purpose of the modded CP3 was to raise the rail pressure. How do you keep it from going to high? Im a newbe.

rip 112

Its more to increase the volume of fuel and move it at a quicker rate.

Asher

I found the best setting for me is 4.11 SW3, and MP-8 when needed...

I have tried the SW5, SW7 settings, but I got less low end response from them and the 7 had scary amounts of smoke... I think one of my issues is the Rokk sensor, and tone ring mod making to much timing...

Jason_K

i'm curious what the difference in dyno #'s would be between smarty tnt running rp4 w/ no mp8, compared to smarty tnt rp1 w/mp8 100%. any ideas?

Roebuck9

Mp8 Finally on and man it runs awesome when I turn it on. It smokes super heavy now but only when it is on. Other then that the smoke is pretty thin even though I am runnin a 4.11 beta program. Awesome computer though and glad I purchased it!