kingofdodge7131

do the 3rd gens have them? are they just as easy to remove?

alltork

Yes, come off in about 5 minutes with two small flat bladed screwdrivers. You need to pry out the snapring.

alltork

Yes, come off in about 5 minutes with two small flat bladed screwdrivers. You need to pry out the snapring.

Tfeore

It's very easy, I have actually put mine back in and taken it out again. Just needed something to do. You can have it out quick!!

spots

For turbo sound lose the black tube also.

RamDan03

Yep, i've done both. I plucked the silencer ring and replaced the black tube with an AirAid MIT for about $50.

phloop

So far in my quest for more turbo sound I've removed the silencer ring and replaced the turbo silencer thingie with a length of 5" exhaust tubing. I think it might have helped a bit but not that noticible. Think an open air filter set-up will add the sound I'm looking for?

bulabula

I'd bet on it. I drilled my stock airbox with a few 2" holes and the turbo whistle is much louder.

kingofdodge7131

lil balck tube, is that just the plumbing up to the intercooler?

spots

No it is between your air filter and your turbo inlet.

tcr

loose the silencer ring,your muffler, and re pipe the air intake - torque tube/BAHF. She will scream to ya!