Sbps6280cr Questions?
09-20-2007, 02:21 PM
#1
Registered User
Thread Starter
Join Date: Jan 2006
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Sbps6280cr Questions?
I Am Looking Into Dropping An Ii Sbps6280cr On My 2003 Cr. I See The Note From Ii States That I Need To Buy The Hx40 Downpipe. My Problem Is That I Have Already DoNe 4 To 5 Inch Exhaust To Include 4-5" Downpipe. Is The Hx40 Pipe Offered The Same Hx40 Pipe Used On 94-2002 Br/be Trucks? And Does Anyone Know The Outlet Size Of The Cast Elbow On This Ii Turbo? Any Help Would Be Greatly Appreciated Guys! 
Rich
Rich
09-20-2007, 02:28 PM
#2
Registered User
Join Date: Oct 2005
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Did your new dp get rid of the elbow?
If so, then order the turbo with a 3rd gen large flange. That's what I did with my '03 and it worked great with my 4" Banks downpipe. The Banks dp eliminated the elbow and bolted direct to the turbo.
If so, then order the turbo with a 3rd gen large flange. That's what I did with my '03 and it worked great with my 4" Banks downpipe. The Banks dp eliminated the elbow and bolted direct to the turbo.
09-21-2007, 08:09 AM
#3
Registered User
Thread Starter
Join Date: Jan 2006
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
The Downpipe I Ordered Goes 4 To 5" And Does Not Delete The Cast Elbow On The Turbo. I Have Several Cast Elbows From A Variety Of Third Gen Trucks. Im Hoping That The Turbo End Of The Flange Is The Same, Regardless The Year, I Know The Downpipe Side Of The Elbows Are Different. Does The Industrial Injection Turbo Also Come With A Cast Elbow That Can Be Changed?
Thread
Thread Starter
Forum
Replies
Last Post
Turbocrazy
4th Gen High Performance and Accessories 2010 and Up
3
02-25-2013 04:40 PM
popeye4wheeler
3rd Gen Engine and Drivetrain -> 2007 and up
4
01-30-2011 06:24 PM
Clucker
Performance and Accessories 2nd gen only
22
09-24-2009 09:34 PM
GR40RCapri
2nd Gen. Dodge Ram - No Drivetrain
3
10-30-2007 09:37 AM
gman07
1st Gen. Ram - All Topics
3
04-15-2006 08:32 PM