PimpRohr

Removed the fender and door emblems today...didn't have time to get rid of the emblems off the tailgate. I also foam padded the whole truck and put a coat of wax on it and detailed her up a bit. Here is what it came out like.

Jesse

Ripper01

Nice work jus wonderin if i should do the same to my truck..

nriver

looks great

Herrin811

Just posted pics of mine...I left only the Cummins "C"...Can I have your tires???

horsepoor68

Looks good. Whats the best and easyest way to remove them?

ocsurf16

Pimp...do you tow anything with you truck??..if so does it sag in the rear now since you added the lift up front?...i would like the same exact setup but im afraid that it will sag in the rear...also...no rubbing at all with 35's????!?!?!?!

Herrin811

I used fishing line and 3m adhesive remover

PimpRohr

I used a tint squegee (spelling) to pull the emblems off. Then I used some adhesive remover to get most of the film off, and what didn't come off by then I hit with some extra compound and the buffer and it zipped right off.


I have a revtek leveling kit on the truck and it doesnt rub with the big 35's up there. Honestly, the back is still about 3/4 of an inch higher than the front doesn't show any sign of getting and lower back there with fatigue or what not. I am installing a revtek 4 inch kit on the truck soon so I am not extremely worried about it. The rides wonderful now, and if you look closely you'll see my newly installed rancho front stabilzer which really helped firm up things in the front.

nitis

If you want to pull off the spears on the doors they are the easiest of anything. I used bug and tar remover the touched up with a lil polish.

TexasCTD

Pimp, looks great! I did mine a few months ago and so far I love it. I have no emblems on mine now except I added a Cummins "C" on the lower left hand side of the tailgate. Pix in gallery.

Future plans include replacing the chrome rear bumper with a Frontier bumper (black powdercoat), painting an aftermarket grill black and replacing the stocker chrome one, getting rid of the pinstripe, and powdercoating the wheels black except for the chrome centers. That will probably conclude my exterior in the short term. Someday maybe replace the BFG AT tires with BFG Mud Terrains like NRivers.

PimpRohr

Thanks guys, are those power wagon flares on your truck TEXAS? I have some pocket flares and I am not sold on the looks of them on my color truck.

610dodge

i just took mine off last friday. i was thinkin of getting the C power emblems and putting them where the ram 3500 was. what do yall think that it would look like? just wanted to do something different.

PimpRohr

I have one on my back window and it hasn't held up that well. Its been on about two months now and it looks like its 5 years old. I'd pass and just leave it bare.

Herrin811

Mine either...Faded bad, but the chrome is holding up

Greenhornet1986

Looks good, I've been thinking of doing the same thing to my truck, but I think I'm going to do a black/chrome combo with my truck