question on cp3 mod
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: College Station Texas
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
question on cp3 mod
I am fixing to do 50hp or 90hp edm injectors for my truck and I was wondering about the bag of parts that the industrial offers or the arson kit parts for my truck? Would it give me any gains or is it just waste of money and which one is better?
#2
Registered User
I just had the II Bag of Parts installed with my Flux 2s. I have not had anytime to do any real comparisons do to IKE. But I see normal cruise Rail Pressure a little lower with same or more power. Until I can load the TNT and do some real testing I won't be sure, but for the money I am glad I did it. I definitely have enough fuel for the Flux 2s and Revo software.
#6
Registered User
Just my initial observations, my rail pressure is a little lower at same throttle and speed than before. Of course there are more than one mod done and I have not really done any real tuning/testing. But what I think I see is lower rp with the same volume with the II Bag of Parts. That is just guessing for now. I think it is a good thing. The couple of full WOT I have been able to do I see good, steady rp(no dramatic loss) and can't quite clean up the smoke with the current Smarty/TST settings. I am in Houston and IKE has things pretty screwed up still. But in the next couple of weeks I will load TNT and do some real testing to see where I run out of RP with this setup.
Thread
Thread Starter
Forum
Replies
Last Post
Jethro6213
3rd Gen High Performance and Accessories (5.9L Only)
19
07-11-2008 11:59 AM
Billm2004
3rd Gen High Performance and Accessories (5.9L Only)
10
09-23-2007 11:42 PM
BADBOWTIE
3rd Gen High Performance and Accessories (5.9L Only)
28
07-14-2007 02:36 PM
jamesbfishin
3rd Gen Engine and Drivetrain -> 2003-2007
6
07-07-2007 08:25 PM
megacabrule
3rd Gen High Performance and Accessories (5.9L Only)
33
05-10-2007 01:07 PM