Quadzilla Dyno numbers
#1
DTR Detective
Thread Starter
Quadzilla Dyno numbers
Has anyone dyno'd a stock Auto 06 with just Quadzilla Standard on any settings, curious what the real world rear wheel numbers are?
#7
First off, 600 series trucks are way different. I would really like for everyone to understand you cannot compare anything from an 03-04 truck to a 04.5-07 5.9L truck.
Second, the toruqe numbers are different because one was a load dyno and one was an inertia dyno. At least that is what my money is on.
Second, the toruqe numbers are different because one was a load dyno and one was an inertia dyno. At least that is what my money is on.
Trending Topics
#8
Registered User
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
I concur with that qzilla. BTW good to have you back around, havent seen you for awhile.
Dynojet (inertia dynos) will give you higher hp and lower tq numbers.. Mustang (load dynos) will give you lower hp and higher tq numbers
A mustang dyno is IMO the best dyno to get real numbers for a diesel truck.
Kevin
Dynojet (inertia dynos) will give you higher hp and lower tq numbers.. Mustang (load dynos) will give you lower hp and higher tq numbers
A mustang dyno is IMO the best dyno to get real numbers for a diesel truck.
Kevin
#9
I'm not trying to stir the pot, I just don't understand...were those numbers off a Dynojet or something?
#11
mustang dyno. with my slipping clutch at the time i got 389hp, 910. here's a clip from the results sheet of the internet. #41
36 Dabin Killie 02 Ford Exhaust 203.3 474.5
37 Bob Dewitt 92 GMC Lots of power 370.2 864.1
38 Malcom Cross 92 Chev Cummins w/power 472.0 1101.8
39 Lloyd Vaughan 06 Ford Stock 243.7 568.8
40 Chris Stieh 04 Dodge Turbo, Chip, Intake, Exhaust 389.9 910.1
41 Brandon Miller 04 Dodge Chip, Intake, Exhaust 418.8 977.6
42 Mike Gunn 06 Ford Stock 264.8 618.1
43 Dean Nichols 89 Dodge Fuel pump, Exhaust 220.9 515.6
44 David Quinn 95 Ford 366.5 855.5
36 Dabin Killie 02 Ford Exhaust 203.3 474.5
37 Bob Dewitt 92 GMC Lots of power 370.2 864.1
38 Malcom Cross 92 Chev Cummins w/power 472.0 1101.8
39 Lloyd Vaughan 06 Ford Stock 243.7 568.8
40 Chris Stieh 04 Dodge Turbo, Chip, Intake, Exhaust 389.9 910.1
41 Brandon Miller 04 Dodge Chip, Intake, Exhaust 418.8 977.6
42 Mike Gunn 06 Ford Stock 264.8 618.1
43 Dean Nichols 89 Dodge Fuel pump, Exhaust 220.9 515.6
44 David Quinn 95 Ford 366.5 855.5
#12
I am just telling you that a Race box will easily put down over 400 rwhp on a 600 series truck.
I will also tell you that while the normal Edge box runs good, our Race box will definitely out run it. The Hot makes them closer.
There is a thread on another site that had a guy make over 400 rwhp with a race box on WVO!!! he also made nearly 420 rwhp to the tires.
I have seen as high as 440 with some wild programming. And no, don't ask for it. It might be made available in due time!
Morkable,
I have sort of been here, I have been running like a chicken with my head cut off. It is bad when you leave work at 10pm and your list of things you did NOT get done is as long as your leg!
I will also tell you that while the normal Edge box runs good, our Race box will definitely out run it. The Hot makes them closer.
There is a thread on another site that had a guy make over 400 rwhp with a race box on WVO!!! he also made nearly 420 rwhp to the tires.
I have seen as high as 440 with some wild programming. And no, don't ask for it. It might be made available in due time!
Morkable,
I have sort of been here, I have been running like a chicken with my head cut off. It is bad when you leave work at 10pm and your list of things you did NOT get done is as long as your leg!
#15
Chapter President
Join Date: Apr 2007
Location: Liberty Hill, Tx
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
not to change subjects but i have a chance to buy a quad box for my 04 the guy wants $150 for it. i am looking at getting a smarty around the end of next month so should i even buy the quad? I don't have gauges yet so should i wait till i get atleast a pyro or can i chip it low and not worry i do have a straight so would that keep my temp lower? Thanks, guys