Fisherguy

Yah, but I already have 3 gauges in the pillar, just kinda thinking of where else a guy could put it.

tcr

Will, Here's what I did as I have 3 on the pillar. Sorry for the phone quality.

GRI

you were wearing your seatbelt.

GRI

oh i got ya.

tcr

No I wasn't! 83mph, trying to take a pic for Jeremy(@Quad)! I'm not to smart

OldSmokey

I made a little bracket and mounted mine just above the heat duct on the right of the speedo

tryNto

I think I am going to make a bracket that will mount it to the A-pillar, when it ever gets released to us common folk...
hope it happens soon... How is the Beta testing progressing?

or may be that 1 on ebay I seen for the Commander

OldSmokey

Testing is going good. This thing has some many options its almost to much!!! I just need to get a stack tune setup to run with my smarty.

yelloz28

I just uploaded the latest update(the one that came out a week or so ago that unlocks the cutom tuning) but haven't had any time to try out the custom tuning.

However I was on a trip this weekend through the mountains and I was working the truck pretty hard and it threw a P0148 code. Well I thought that's fine I'll just clear it with the handy Adrenaline, however it wouldn't clear the code. Asked me to confirm I wanted to clear it, I did, but it wouldn't clear the code.

Anyone else tried this function yet?

cummins dsl

Was the truck running? Were you still driving when you tried this? I had to have the truck off when using the code clearer. Just a thought.

yelloz28

I tired it both ways, but wouldn't clear it. This was the old programming though, so that may have been the issue.

OlRed

When I first got it, it would throw a boost code and the only way I could cear it is when the truck was off and the key in the ON position. I talked to Jeremy and he said that is the only way it can clear codes is when the truck was off. Good luck.

yelloz28

Well I played around with the custom tuning just a little this weekend and wow is it impressive. However I also loaded the factory tuning back on for a day. Then when I went back to my tune, well it was no longer my tune all of the changes weren't saved.

Has anyone else tried switching between the 2? Any idea what the problem might be quad? I have the latest download.

GRI

I had the same issue and It was because I didnt have the latest software on the pulse.

yelloz28

I just did the update, guess I could have downloaded the wrong one, but it was the latest one that quad sent in the email.