3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Quad Race Box Questions

Thread Tools
 
Search this Thread
 
Old 01-28-2007, 10:10 PM
  #16  
Registered User
 
qzilla's Avatar
 
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes on 0 Posts
rail pressure stock should actually be more like 24K or so on a 600. I have seen slightly higher but most are right at about 24K at full load.

The race module will go to about 26.5K if the load and RPM's are there. Nothing to be worried about in my opinion especially since you have to be mauling the truck to get it there.

Rail pressure is similar to stock under normal driving conditions although we do remap it across the board but, the changes are small. You have to run pretty hard to go over about 22K.

Quad
Old 01-28-2007, 11:04 PM
  #17  
Registered User
 
uber_dzl's Avatar
 
Join Date: May 2006
Location: Miami, Florida
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts
does it make sense to use both the quad race box and the quad boost fooler? or does the race box already do boost fooling?
Old 01-29-2007, 12:10 AM
  #18  
Registered User
 
qzilla's Avatar
 
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes on 0 Posts
All our boxes do boost fooling in every setting so there is no need.

Also we get this question a lot so we are working on a FAQ page on our website to help you guys out and we will probably list this exact question on our Boost Fooler page!

Quad
Old 01-29-2007, 01:24 AM
  #19  
Registered User
 
Bluedeviltorque's Avatar
 
Join Date: Mar 2004
Location: The Hardware City
Posts: 303
Likes: 0
Received 0 Likes on 0 Posts
Exclamation

Woah!!! I DID NOT know that the quad race box pushed the EGT's that high! Will a slightly bigger turbo that can push a slighly higher volume of cool air get those EGT's under control? Or will it take a lot more?

Mike who's just days away from dropping the cash for the commander and quad (Race or Reguar not sure yet).

EDIT- Will the EGT's be a little lower on the 555 motors?????
Old 01-29-2007, 06:40 AM
  #20  
wap
Registered User
 
wap's Avatar
 
Join Date: Aug 2005
Location: Ga.
Posts: 3,563
Likes: 0
Received 1 Like on 1 Post
I have 2 egt guages, both preturbo, one isspro and one tst, dont remember the exact location(s) but they both read almost identical numbers.
Old 01-29-2007, 08:05 AM
  #21  
tcr
Registered User
 
tcr's Avatar
 
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Bluedeviltorque
Woah!!! I DID NOT know that the quad race box pushed the EGT's that high! Will a slightly bigger turbo that can push a slighly higher volume of cool air get those EGT's under control? Or will it take a lot more?

Mike who's just days away from dropping the cash for the commander and quad (Race or Reguar not sure yet).

EDIT- Will the EGT's be a little lower on the 555 motors?????
NOPE! I can peg a 1600* pyro when I hold the key forward, 130mph or so. Setting at 140hp. Poor turbo....
Old 01-29-2007, 01:06 PM
  #22  
Registered User
 
qzilla's Avatar
 
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes on 0 Posts
On the 03-04 trucks you really have to be beating on the truck to get much more than about 1350 or so. They run much cooler than the 600's. The 600's will go 1400 pretty easy with a Race module.
Old 01-29-2007, 01:17 PM
  #23  
Registered User
 
Bluedeviltorque's Avatar
 
Join Date: Mar 2004
Location: The Hardware City
Posts: 303
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the input Quad.... I"m still going to be dropping the credit card at the end of the week....

Mike
Old 01-29-2007, 07:22 PM
  #24  
Registered User
 
uber_dzl's Avatar
 
Join Date: May 2006
Location: Miami, Florida
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts
thanx quad for ur answer to my question
Old 01-29-2007, 09:40 PM
  #25  
Registered User
 
TE-44's Avatar
 
Join Date: Oct 2003
Location: San Antonio, Texas
Posts: 162
Likes: 0
Received 0 Likes on 0 Posts
Quad,
Can your boxes make the same hp. without causing the injectors to rattle so much. I ran your 100hp box for about 28000 miles and only had small amounts of this, I then upgraded to the 140 box and now it rattles even on just the 60 setting. The power is great it's just I hate having to turn the radio up to cover the noise .
Old 01-29-2007, 10:46 PM
  #26  
Registered User
 
qzilla's Avatar
 
Join Date: Jun 2003
Posts: 3,741
Likes: 0
Received 0 Likes on 0 Posts
Yup they can be tamed down. The Race modules are much more aggressive down low. They do everything sooner with less boost.
Old 01-30-2007, 06:48 AM
  #27  
Registered User
 
HOBrian's Avatar
 
Join Date: Jun 2006
Location: NJ
Posts: 422
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by runamuk
Pre turbo in the exhaust manifold right behind # 2 cylinder just where they should be!

Rick
I placed the probe right above the turbo on the left side where #5 and #6 cylinders are. These two run hotter than all the rest and would be a great place to see the worst case senario. If you are running hot in cylinders 1-4 you are even hotter in #'s 5 and 6.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BigJohnston
3rd Gen High Performance and Accessories (5.9L Only)
1
02-07-2008 06:14 AM
coobie
3rd Gen High Performance and Accessories (5.9L Only)
2
10-17-2005 10:53 AM
wap
3rd Gen High Performance and Accessories (5.9L Only)
6
09-10-2005 07:15 PM
BigBlueDodge
3rd Gen High Performance and Accessories (5.9L Only)
5
07-25-2005 01:44 AM
B Proctor
3rd Gen High Performance and Accessories (5.9L Only)
10
05-16-2005 08:35 PM



Quick Reply: Quad Race Box Questions



All times are GMT -5. The time now is 12:27 PM.