Problems with MP-8
#1
Problems with MP-8
I just received the MP-8 and installed it but when I first started it the idle surges up and down and it sounds like a lot of pre detonation, that was with the MP-8 at 0%. I then took off my smarty program and returned the CPU to stock thinking maybe the smarty wasn't working with it and the truck idle was still surging up and down with what sounded like a lot of pre detonation, still the MP-8 is at 0%. It threw 5 codes, i think they were throttle position sensor, boost key, water in fuel, something with the cp-3 pump, and i believe one other one. Once i unplugged the MP-8 everything went back to normal
has anybody else run into a problem like this with the MP-8? what do you think the problem is
has anybody else run into a problem like this with the MP-8? what do you think the problem is
#5
Registered User
Join Date: Jun 2007
Location: NorCal
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Try double/triple checking all connections...maybe get some di-electric grease to put on the connections...also are you sure you got sent the correct one for your year???
#7
Registered User
Join Date: Jul 2007
Location: california
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
the owner hasnt chimmed in but he cleaned the connections and **** its a beast! he launched in 4wd at 20psi and the whole truck jumped up and went sideways!!!... i need a 3rd gen
Trending Topics
#10
Registered User
i was thinking of purchasing an TSP MP-8. i'm not up to speed with programmers and chips as much as some of you guy's(guru's).
are they of good quality? will it reduce the engines reliability? i have read that it was a "pressure box". what does that mean? the one feature i do like is the "on the fly" adjustability. thanks for the education
are they of good quality? will it reduce the engines reliability? i have read that it was a "pressure box". what does that mean? the one feature i do like is the "on the fly" adjustability. thanks for the education
#11
yes it is a pressure box, it raises the injection pressure. i have one, and i like it a lot, you can feel a seat of the pants difference.
it is however strong enough to crack injectors, i havent had any probems with mine, but i have bigger injectors
it is however strong enough to crack injectors, i havent had any probems with mine, but i have bigger injectors
#13
Registered User
Join Date: Jun 2007
Location: NorCal
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Smarty all the way!!! And now you can adjust RP with the new REVO, and REVO TNT!!!
You can almost custom tailor your RP, Timing, and shift firmness with the new software!
You can almost custom tailor your RP, Timing, and shift firmness with the new software!
#15
Registered User
Join Date: Jun 2007
Location: NorCal
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts