PML diff cover installed
#1
Registered User
Thread Starter
Join Date: Jun 2007
Location: Avondale,AZ
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
PML diff cover installed
Just got done installing.
3000 miles on the factory mystery fluid...
Decent factory lubelocker style reusable gasket...
Drilled and tapped for a temp sender...
All buttoned up. Used 5 qts. of Amsoil Severe gear 75W90 level with the fill hole. Sprayed with gloss clear over the glass beaded natural finish and replaced the PML supplied SS socket heads with Grade 8 M8-1.25x30mm hex heads.
3000 miles on the factory mystery fluid...
Decent factory lubelocker style reusable gasket...
Drilled and tapped for a temp sender...
All buttoned up. Used 5 qts. of Amsoil Severe gear 75W90 level with the fill hole. Sprayed with gloss clear over the glass beaded natural finish and replaced the PML supplied SS socket heads with Grade 8 M8-1.25x30mm hex heads.
#3
Registered User
Thread Starter
Join Date: Jun 2007
Location: Avondale,AZ
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Comes with a boss but no hole yet. Pilot drilled 1/8 then 5/16 then tapped for 1/8NPT
$180+ shipping
http://yourcovers.com/dc_10361.shtml
$180+ shipping
http://yourcovers.com/dc_10361.shtml
#4
Banned
Join Date: Dec 2005
Location: Twin Falls, Idaho
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
Comes with a boss but no hole yet. Pilot drilled 1/8 then 5/16 then tapped for 1/8NPT
$180+ shipping
http://yourcovers.com/dc_10361.shtml
$180+ shipping
http://yourcovers.com/dc_10361.shtml
#5
Me too. I put in a posi this Saturday. The oil looked nasty. I put it back in since I am going to get an Al cover & Amsoil.
Cover looks good. How many quarts did it take?
Thread
Thread Starter
Forum
Replies
Last Post
cditrani
Performance and Accessories 2nd gen only
13
12-04-2005 09:42 PM
Lightman
3rd Gen High Performance and Accessories (5.9L Only)
7
04-18-2005 02:09 PM
HighTen
3rd Gen High Performance and Accessories (5.9L Only)
3
02-23-2005 02:51 PM
davelinde
3rd Gen High Performance and Accessories (5.9L Only)
31
01-28-2005 05:38 PM
MikeyB
3rd Gen High Performance and Accessories (5.9L Only)
13
01-24-2005 07:16 AM