Please tell me my SRT-10 pod isn't broke,,,look here
#1
Registered User
Thread Starter
Please tell me my SRT-10 pod isn't broke,,,look here
I had my kid pick it up at the dealer today. I opened the package and noticed something that looked like a break to me. I haven't had a chance to pull mine off yet, so I don't know for sure. Is there something broke off from there. It's the upper hole. Is there supposed to be a prong sticking out like the one on the right. Hope you guy's can see what I mean in the pic. Thank's
http://community.webshots.com/photo/...15958129tVPBzF
http://community.webshots.com/photo/...15958129tVPBzF
#3
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
My original reply to this post was going to be "it looks broke to me"
Well, I went and dug up my original OEM pillar mount; the one that was in there before the srt10 pillar I now have.
Well anyhow, the original has the same "break out" mark in the same place.
I think it is where they break it away from the mold.
So, I dont think you have anything to worry about, just a manufacturing mark.
Well, I went and dug up my original OEM pillar mount; the one that was in there before the srt10 pillar I now have.
Well anyhow, the original has the same "break out" mark in the same place.
I think it is where they break it away from the mold.
So, I dont think you have anything to worry about, just a manufacturing mark.
#5
You'd be suprised, sometimes they have fitment issues and can't modify the mold. They may clip off the tip of that stand off to make sure it fits tight.
(OR) They have face to face molds that share that same post and they snap it off when it gets pulled out.
It looks "stressed" like it has been snapped or broken off.
? Never know till you slap it in there.
(OR) They have face to face molds that share that same post and they snap it off when it gets pulled out.
It looks "stressed" like it has been snapped or broken off.
? Never know till you slap it in there.
#6
Registered User
Thread Starter
Originally Posted by P.J
Never know till you slap it in there.
Trending Topics
#11
Registered User
Join Date: Jun 2005
Location: Southern IL
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
I dont think anyting important is broke....I dont remember a pin there on my pillar...now the littel peg to the right, in the middle..is kinda important...It goes into a hole in the metal of the pillar for alignment
#12
Registered User
Thread Starter
Ya, I got it installed and nothing was broke. Too bad I ran out of daylight and it started raining. Couldn't finish the job. I got 3 in the cubby hole and 1 on the pillar.
Thread
Thread Starter
Forum
Replies
Last Post
7fa
3rd Generation Ram - Non Drivetrain - All Years
1
01-02-2006 08:35 AM
Bad Ramer Jamer
3rd Gen High Performance and Accessories (5.9L Only)
7
12-01-2005 02:30 PM
lovemysan
1st Gen. Ram - All Topics
9
05-23-2005 06:14 PM