nobody

[IMG] [/IMG] [IMG] [/IMG] [IMG] [/IMG] [IMG] [/IMG]

Hey, sorry the pics are such bad quality they were taken with a cell phone. This is the turbo a friend of mine is running on his truck. The guy he purchased the turbo from knew very little about it. We are not sure who makes it , the size, or any specifications. The only identification on it is the numbers in the first pic (2004 and 506492.) There may have been some more numbers inside the exhaust exit , but they were ground off. Looks similar to the turbos from Industrial Injection, HTT, and every one else for that matter. I have heard it called B-1 , B-1 steriod, and the original B-1. I personally do not know enough about these turbos to positively identify any of them. I do know that this thing spools very fast, seems to cool very well, and makes 55psi. to 58psi. when all the programs are set to kill. I hope this is enough info for someone to identify this thing. I will try to answer any ?'s you guys may have. Thanks in advance!! John

greyrig05

hmmm.......

dogger

It does look to be a variant of the B-2. I have a HTB2 62/12 that looks like it except with a wastegate.

L8r,...........dogger

greyrig05

does it look big enough to be around a 64 or 66 ?

greyrig05

nobody seen this ????

McnDiesel

Looks to be a B-1 from TAD with a 61-62mm wheel on the intake and a 10 blade 71mm on the exhaust what other people are calling,super phat shaft and low drive pressure wheel.The exhaust housing I do not know what non gated housings they use but probally in the 14-18 cm range

greyrig05

i know of a couple how high horsepower trucks running this turbo.(650-700hp) will a 62 hold this kind of power. if that is what it is

McnDiesel

IMO a 62mm turbo will not support 650-700 HP on fuel only, with the right setup on NOS you might get there but if your looking for for over 600 HP on a single turbo, would go with a 66mm with the large 71mm turbine wheel or a turbo like, II Silver Bullet, do not know the specs on that turbo but probally close to the 66/71 only proven to support more HP.Now with that said every truck I build over 600HP I go with compounds still IMO that is the only way to get big numbers on fuel only and no drugs but some will argue the point.

PourinDiesel

Turbo Auto Diesel B1.

nobody

[IMG] [/IMG]

I found this old pic.
Left:Aurora 2000, Middle:The turbo in the above pics ,and Right:Aurora 5000


Turbo Auto Diesel ? Do you know how to contact them, or a link to their website?

PanteraGSTK

Can I have some of your spare parts?????

Gypsyman

Here ya' go. Turbo's USA.

PourinDiesel

Ahh the Aurora 5000....

cquestad

I still get the shivers ever time I look at mine...big *****!

nobody

The picture just does not do it justice. The aurora 5000 is a monster!