No Power... Why?
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Central, Pa
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
No Power... Why?
Today I was driving trh truck and I went WOT to pass someone. The truck went to about 20psi and then it made a sound (like a blow-off valve) and fell on its face with no boost and no pick up. I backed out of the throttle and everytime i try to apply more throttle than barely easing into it, it does the same thing, What should I do??
PS: only mods are in the sig..
Thanx in advance
PS: only mods are in the sig..
Thanx in advance
#7
Registered User
Join Date: Apr 2010
Location: Salmon Arm, BC Canada
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
One of the service schedule functions in these trucks is to check the torque on the clamps for the intake from the turbo through the intercooler to the intake horn. This happened to my BILaw on his modded 98 24V whilst pulling a 16k trailer uphill in Alaska. He couldn't even hardly move the whole setup and got the trailer and truck towed. They re-installed the boost hose connection, retirghtened the clamps and away he went. Hope this is what you have as it is less expensive than the IC replacement.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jumper
3rd Gen High Performance and Accessories (5.9L Only)
14
04-15-2008 12:19 AM
steelblitzkrieg
3rd Generation Ram - Non Drivetrain - All Years
16
05-24-2007 02:26 PM
rollsroyce1999
Performance and Accessories 2nd gen only
16
08-11-2006 07:42 PM