3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Newbie ? for 05 and juice/attitude.

Thread Tools
 
Search this Thread
 
Old 02-14-2005, 09:34 PM
  #1  
Registered User
Thread Starter
 
HappyGilmore's Avatar
 
Join Date: Feb 2005
Location: Watertown, SD
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Newbie ? for 05 and juice/attitude.

Hi, As you can tell I am new to the forum and have a few questions for all you experts.

I recently purchased an 05 CTD auto and was wondering about putting the edge juice/attitude on it. Is the stock 4" exhaust suffecient enough? I put an afe air filter in place of the stock, is that suffecient enough or will I absolutely have to go to the proguard? What temps are you all seeing and what is safe? With the attitude egt gauge I think they mount the sensor right at the manifold so what is to be expected for temps? My friend has one of his he is see around 500* at cruising and 1100* when on it hard. I dont really plan on running over the third level at all due to the fact I want my tranny to last.

Also I pull a 7x28 foot enclosed snowmobile trailer.

Thanx for all the help.

P.S. Is $800 good for the juice/attitude with the special A-pillar all installed?
Old 02-15-2005, 02:13 AM
  #2  
Muted User
 
kyle@ftlb's Avatar
 
Join Date: Sep 2003
Location: Cedar City, UT
Posts: 205
Likes: 0
Received 0 Likes on 0 Posts
The juice with attitude is made to safely work with all stock components. It will defuel when it sees high EGT's so you will not burn up your truck. Your stock exhaust is sufficient, and an AFE filter is fine. You will see temps over 1200* for sure in the summertime which is fine. I've seen a stock 05 w/ 6 spd hit 1300 when towing heavy. And for sure $800 is a deal, (heck its no deal its a steal )
Old 02-15-2005, 08:25 AM
  #3  
Banned
 
Kyle Graham's Avatar
 
Join Date: Sep 2004
Location: Washington State
Posts: 697
Likes: 0
Received 0 Likes on 0 Posts
800.00 installed with a pillar mount is a very good deal
Old 02-15-2005, 10:43 AM
  #4  
Registered User
Thread Starter
 
HappyGilmore's Avatar
 
Join Date: Feb 2005
Location: Watertown, SD
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Thanx guys.

I just ordered it this morning after reading about 40 pages on it last night. They are charging me $750 for the juice/attitude/a-pillar mount and $50 for the installation. I dont ever plan on running any setting higher then 3, that way I can stay clear of all problems that may arise.
Old 02-15-2005, 11:22 AM
  #5  
Registered User
 
Lightman's Avatar
 
Join Date: Mar 2003
Location: Cleveland, OH
Posts: 2,488
Likes: 0
Received 1 Like on 1 Post
Now that's funny - you don't 'plan' on going over level 3. We've heard that one before Before you know it you'll have a performance transmission and twins
Old 02-15-2005, 03:01 PM
  #6  
Registered User
 
RamWheelsBy4's Avatar
 
Join Date: Aug 2004
Location: Houston, TX
Posts: 3,697
Likes: 0
Received 1 Like on 1 Post
Yea, I dont ever plan on pushing the up arrow, but just have this thing about ricers. Banks 5" polished tip points dead in the middle of the Honda, Subaru, ricer driver side window. Shame on 'em if they try to sneak by on that side.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
5.0 Mustang Man
Performance and Accessories 2nd gen only
6
10-21-2008 02:50 PM
tvanry
3rd Gen Engine and Drivetrain -> 2003-2007
2
06-09-2008 02:25 PM
tvanry
3rd Gen High Performance and Accessories (5.9L Only)
4
05-29-2008 09:17 PM
Hondo
3rd Gen High Performance and Accessories (5.9L Only)
2
03-03-2005 06:40 PM



Quick Reply: Newbie ? for 05 and juice/attitude.



All times are GMT -5. The time now is 09:58 AM.