Anyone know where to get one of these?

http://dtw.truckmoxie.com/showownerp...n-137781-pos-1

 

might be okay for strip racing, but it looks like it covers up way too much windshield for the street.

 

I hate to say it, but I agree that this is to much for the street.

I think it would actually work better if they sat next to each other, then it might not be that bad.

 

I checked about two months ago with a local stereo shop that specializes in custom dash work and he wanted to charge me 600+ for the same thing. I went with an SRT single and put my trans temp down by my brake controller. Looks good and works just fine. Total price without the guages. $80.00

 

Nevada,

We do have a new product too, it's a REPLACEMENT pillar for the 2003 + trucks that is moulded in the factory Taupe color and has the factory grain too (in fact it is the same material from the same supplier) and can have either two or three gauges. It acutally replaces the factory pillar so you don't have to cut up the factory handle and ruin it. Of course it doesn't have a handle as there isn't room for one but it looks factory. One supplied stainless machined thread phillips head is all that is required to install it too. Take the factory one off, and install ours.

Mark @ DPPI

 

I went with the SRT-10 pillar because I didn't want to loose the handle.

I have not used that handle at all sense I installed the weston step bars.

We dont need no stinking handle.