New engine and twins
09-20-2008, 05:46 PM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
New engine and twins
Short mention of the fellows involved in my new engine and twins.
Tim Barber built me a custom CR engine, skinned it down and rebuilt from the oil pan up..started this in April and had it running yesterday. Throughout the entire process Tim was always avaliable, gave me constant updates and gave me plenty of options. The engine sounds great, idles very smooth...side by side with an 07 5.9, it sounds smoother.
Nathan Wright handled the air side of things and once again built a precision kit, again he was always there to keep me grounded!
Don M took care of the fuel requirments, valve train and the long stick.
Rob
Tim Barber built me a custom CR engine, skinned it down and rebuilt from the oil pan up..started this in April and had it running yesterday. Throughout the entire process Tim was always avaliable, gave me constant updates and gave me plenty of options. The engine sounds great, idles very smooth...side by side with an 07 5.9, it sounds smoother.
Nathan Wright handled the air side of things and once again built a precision kit, again he was always there to keep me grounded!
Don M took care of the fuel requirments, valve train and the long stick.
Rob
09-20-2008, 07:32 PM
#5
Registered User
Join Date: Feb 2008
Location: Vancouver Island BC
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Right on Rob!
Tim seems like a great guy that has always impressed me with his knowledge and honesty. If I didn't have Malcolm in my back yard I would have Tim build my stuff.
Just curious, but how is the fuel knock with the big injectors?
Congats man!
Tim seems like a great guy that has always impressed me with his knowledge and honesty. If I didn't have Malcolm in my back yard I would have Tim build my stuff.
Just curious, but how is the fuel knock with the big injectors?
Congats man!
Trending Topics
09-20-2008, 08:15 PM
#8
DTR Advertiser
Join Date: Sep 2002
Location: Va Beach,Va
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Rob great doing buisness with you and keep me posted as you break it in. I look forward to seeing how much power it puts out. Thanks for the kind words now get out and drive the thing. Tim
09-20-2008, 11:19 PM
#11
Registered User
Join Date: Feb 2008
Location: Vancouver Island BC
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Hey Rob,
Did you drop the compression?
I'm going to build a spare motor and am toying around with a bit less squeeze.
Hope your better half lets your truck out to play at BD!
Did you drop the compression?
I'm going to build a spare motor and am toying around with a bit less squeeze.
Hope your better half lets your truck out to play at BD!
09-21-2008, 12:03 AM
#13
Registered User
Thread Starter
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
As for my wife, I have been told that I'm not allowed to dyno this year/////we will see if I can work some magic...as for now BD is on in my mind but not in hers>>>
