New Engine
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
New Engine
Alright, I need to freshin up my engine. Rod and main bearings were scuffed pretty bad. Pistons were scatched from metal debris. Root of the problem I'm still not certain. Pretty sure the damper caused the breakdown.
I'm gonna rebuild with much of the same but will change some.... more clearance, Cunningham rods.......
Still searching for a quality engine builder. Have spoke with Lloyd, Tim and Nate and the ear is to the ground. Freight will be kicker, however I'm not sure I'll find a shop around this area.
Did speak with Ray from RayMac, I like what I heard but have made no decisions.
I'm gonna rebuild with much of the same but will change some.... more clearance, Cunningham rods.......
Still searching for a quality engine builder. Have spoke with Lloyd, Tim and Nate and the ear is to the ground. Freight will be kicker, however I'm not sure I'll find a shop around this area.
Did speak with Ray from RayMac, I like what I heard but have made no decisions.
#4
Bummer, good luck on the rods, they were 14 weeks out when i ordered but someone cancelled so i got them in about 6 weeks.
send me a pm and ill tell you about what i just got done with.
send me a pm and ill tell you about what i just got done with.
Thread
Thread Starter
Forum
Replies
Last Post
PCM
3rd Gen Engine and Drivetrain -> 2007 and up
19
02-15-2011 10:08 PM
Lost Lake
12 Valve Engine and Drivetrain
3
02-16-2010 06:04 PM
chumstone
3rd Gen Engine and Drivetrain -> 2003-2007
4
03-17-2007 11:05 PM