My H2 wheel install
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: Concord, CA
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
My H2 wheel install
My old wheels were the Gray Alum. ones. I stripped them and polished them to give them a brushed looked. I liked those wheels more then the ones I have now.
New wheels are H2 wheels, and if you did not know these DON'T just bolt on, you have open up the center hole.
This little lip is the part that has to come off
I used my router with a Flush bit, and guide bearing.
Placed the guide bearing aginst the wheel, and set the depth
Only way to do it from the back side, that allows the bearing to be on the right area of the wheel and router gets a smooth place to glide
Finished part, almost like I knew what I was doing!
Now for tires, same Stock 315/70/17 off the H2. Its about a 35 and finally a tire that fits the wheel well of the dodge
New wheels are H2 wheels, and if you did not know these DON'T just bolt on, you have open up the center hole.
This little lip is the part that has to come off
I used my router with a Flush bit, and guide bearing.
Placed the guide bearing aginst the wheel, and set the depth
Only way to do it from the back side, that allows the bearing to be on the right area of the wheel and router gets a smooth place to glide
Finished part, almost like I knew what I was doing!
Now for tires, same Stock 315/70/17 off the H2. Its about a 35 and finally a tire that fits the wheel well of the dodge
#4
Banned
Join Date: Mar 2007
Location: Northern California
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#13
Registered User
Join Date: Aug 2006
Location: baltimore, md.
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
chrome goes with my rig though...
i think if i powdercoated them- my bumpers would be the only thing holding me back from the whole black/blue look. which would look insane
i think if i powdercoated them- my bumpers would be the only thing holding me back from the whole black/blue look. which would look insane
#14
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Join Date: Aug 2006
Location: baltimore, md.
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
yea. supposedly there is a guy around my area- same color truck but a long bed, with the same wheels. talk about being ****** off about that... ill probably add chrome door spears and side steps to accent the truck alittle more. i was against keeping her chrome and blacking her out- but bumper covers run a nice $450 a piece.. no thanks.