moto metal aftermarket rims? 2006 2500
#1
moto metal aftermarket rims? 2006 2500
i gota 2006, 2500 cummins i am lookin to put some moto metal 950 rims on it but am wondering how they hold up to pulling 5th wheel loads? i dont pull much with it, but i will use it for the occasional pull and heard that sometimes aftermarket rims on these wont stand up to the load and can crack?
thnks
thnks
#2
Registered User
Join Date: Nov 2008
Location: steamboatsprings
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
thay wont crack,wider rims may eat up your balljoints depends on what the offset is,with those you should be fine i have many friends that haul heavy loads with aftermarket rims and never a problem.
#3
Registered User
I put Moto Metal 909's on my truck and two days later a guy is looking at them at a restaurant and asked me how I like them.
I told him they are fine, then he told me to watch the pattern closely for cracks because he has lost 4 of the same rims in under a year due to cracking, and he doesn't carry or haul heavy!!!!
So far I have had mine a month and only hauled 3,000 lbs once and towed my smaller 10,000 lb trailer twice. No cracks yet. But my rims are 18" and his were 20". I hope that makes a difference!!!
I told him they are fine, then he told me to watch the pattern closely for cracks because he has lost 4 of the same rims in under a year due to cracking, and he doesn't carry or haul heavy!!!!
So far I have had mine a month and only hauled 3,000 lbs once and towed my smaller 10,000 lb trailer twice. No cracks yet. But my rims are 18" and his were 20". I hope that makes a difference!!!
Thread
Thread Starter
Forum
Replies
Last Post
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
3
04-19-2009 01:25 AM
ShawnQ
3rd Gen High Performance and Accessories (5.9L Only)
5
12-28-2005 02:01 PM
tands1000
3rd Gen High Performance and Accessories (5.9L Only)
2
10-28-2005 12:55 AM