Moto Metal 951 and 315?
02-06-2007, 04:02 PM
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: The Woodlands, TX
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Moto Metal 951 and 315?
Im fixing to buy some 17x9 black moto metal 951s on 315 BFGs w/a 2" leveling kit. My question is what backspacing do I need so they dont rub. Im not worried if they stick out some. I have searched and just want to make sure before i buy them. Thanks in advance.
02-06-2007, 07:22 PM
#3
Registered User
Join Date: Jan 2005
Location: Canada
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
i think with the 17x 9 rims, they only offer one size, and back spacing.i found that with most rims, one back spacing, you might want to run an 8" rim.i run 9"rims, with the leveling kit, no issues with rubbing except for the fender, at the very bottom, a rubber mallet takes care of that.
Thread
Thread Starter
Forum
Replies
Last Post
forced5
3rd Gen High Performance and Accessories (5.9L Only)
19
01-31-2007 11:47 AM
VikingDiesel
3rd Gen High Performance and Accessories (5.9L Only)
4
11-06-2006 01:12 PM
ShawnQ
3rd Gen High Performance and Accessories (5.9L Only)
5
12-28-2005 02:01 PM