Luk Pro-Gold Clutches
#1
Registered User
Thread Starter
Join Date: May 2004
Location: A-Tx
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Luk Pro-Gold Clutches
I think I will be in need of a new clutch in a couple of weeks, and was wondering if anybody has had any experience with the Luk brand clutch. More specifically, the Pro-Gold Cerametalic version. I am looking at them because I can't afford a Southbend rigth now. The only other performance mod I am considering is switching to a Quad 0-30-60-100 box from the EZ, so I don't think I really need one that heavy-duty anyways. Any input good or bad on the Luk brand will be appreciated.
Scott
ps: what should I expect to pay for an install, truck has 43,000 miles so I assume the flywheel will need resufacing but no other linkage, etc... will need replacing.
Scott
ps: what should I expect to pay for an install, truck has 43,000 miles so I assume the flywheel will need resufacing but no other linkage, etc... will need replacing.
#5
Registered User
Like bigblock2stroke said. LUK makes allot of clutches, I know several companies stick their name on it, but still a LUK. I think you will be fine with the LUK.
#6
Registered User
Join Date: Aug 2004
Location: sutter CA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
The biggest problem I have heard is that the disc's are a metalic base which can over time chew away at the flywheel, whereas the SBC's are feramic which is organic and easier on the flywheel. But SBC does use their pressure plates in some of their kits.
#7
Registered User
Thread Starter
Join Date: May 2004
Location: A-Tx
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I guess they call it cerametalic, and if you look it up on their website it has a technical bulletin about abrupt engagement. The TST website states that it's not recomended for towing livestock, not that I do, but I found that amusing. I don't really tow anything actually, I just don't want to go back to an OE clutch. I'm somewhat considering an SBC Con O. I am within it's 350hp power range and it's less than $150 more than the Luk. Thanks for the input BigBlock, 67, and Matty.
Trending Topics
#8
Some info I found interesting. I just put a SBC Con ofe in my truck.
After some investigating I ask Peter at SBC if their clutches were new or remanufactured. His reply was that their clutches were New Modified. ie someone elses new clutch that they have modified to be better. I have mixed feelings about this. Not sure if I would still buy one.
On the other side the new clutch is better and holding.
After some investigating I ask Peter at SBC if their clutches were new or remanufactured. His reply was that their clutches were New Modified. ie someone elses new clutch that they have modified to be better. I have mixed feelings about this. Not sure if I would still buy one.
On the other side the new clutch is better and holding.
#9
Registered User
Join Date: Mar 2004
Location: Roseville CA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Look into CenterForce clutch kits, just put one in mine and no slippage with TST
Watched a 02 with twins and just about everything else on dyno put down 550+hp 1050+Tq and zero slippage, so I figure I will never be above those numbers so this is fine for me and priced alot better
Watched a 02 with twins and just about everything else on dyno put down 550+hp 1050+Tq and zero slippage, so I figure I will never be above those numbers so this is fine for me and priced alot better
#10
Registered User
Join Date: Sep 2003
Location: arvada co
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
luk cerametallic
I replaced my stock clutch back in january, I used the luk cerametallic clutch. So far I am very impressed with it, I have some basic mods to my 03 edge box,afe filter,exhaust, I pull a fifth wheel ona regular basis up and down the mountains in colorado with no problem. I bought mine at dial-a-clutch.com good price compared to southbend.
#11
Registered User
Join Date: Aug 2004
Location: sutter CA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
I think that with the centerforce clutches they are very dependent on rpm's for clamping force due to their weight design in their pressure plate which isnt very good with a low rpm torquey cummins. I have only seen one in a friends 2002 that was only about 350 Hp and it held it but I havent talked to him in a long time.
#12
Registered User
Thread Starter
Join Date: May 2004
Location: A-Tx
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Well, I appreciate the input guys. It will still be a couple of months before I can afford to do this. Price is definitely a factor right now, so I may even just have LUK's factory style clutch done. Not only am I having to make my usual payments, but have to save for my payments when I go back to school fulltime in the fall, and save for the clutch. Good news is that its doable though. Does anyone have a ballpark for what a shop should charge for an install so I don't get ripped. I have never had to have a clutch replaced before, so I am clueless as to how many hours it should take, etc...
#13
Registered User
Join Date: Aug 2004
Location: sutter CA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
I just talked to my buddy with the centerforce and he smoked it and went to a SBC.
I got mine installed by a very reputable shop in a half a day for 250. He was the cheapest everyone else was 350. That also included the flywheel machining.
I got mine installed by a very reputable shop in a half a day for 250. He was the cheapest everyone else was 350. That also included the flywheel machining.
#14
Registered User
Join Date: Feb 2004
Location: Cookeville, Tn
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
I had the TST Ceramic. I was not impressed. It will definately hold the power but the engagement is the problem. With a trailer it is impossible to take off or back without jerking your teeth out. For about the same money you could get the SBC ConO for $48 more dollars and I'm sure it would have smoother engagement. The SBC Rally is a reasonablely priced clutch, but I've never talked to anyone that has one. My dad is in the market for a clutch and I would love to hear someones input if they have one.
#15
Originally posted by el jefe
Yeah, I guess they call it cerametalic, and if you look it up on their website it has a technical bulletin about abrupt engagement. The TST website states that it's not recomended for towing livestock, not that I do, but I found that amusing. I don't really tow anything actually, I just don't want to go back to an OE clutch. I'm somewhat considering an SBC Con O. I am within it's 350hp power range and it's less than $150 more than the Luk. Thanks for the input BigBlock, 67, and Matty.
Yeah, I guess they call it cerametalic, and if you look it up on their website it has a technical bulletin about abrupt engagement. The TST website states that it's not recomended for towing livestock, not that I do, but I found that amusing. I don't really tow anything actually, I just don't want to go back to an OE clutch. I'm somewhat considering an SBC Con O. I am within it's 350hp power range and it's less than $150 more than the Luk. Thanks for the input BigBlock, 67, and Matty.
I think the CON O may be a bit little for most - Out grow to quick