largest inducer on twins
#17
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
II is testing a set of twins with a regular silver bullet over a big brother ....works great with a cp 3.4 and lots of fuel. Daily driver...probably doable if your skilled. ks
#19
Registered User
Join Date: Aug 2003
Location: Jeffersonville, Ohio
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Chris, I looked at that turbo for awhile...I'll be very interested to see how it works out....It will spool faster than an s400 but unless you get a big compressor wheel on it I can't see how it can move more air....do you have a turbo map for it...I used to have one but I just looked and I couldn't find it. ks
That would be comparable to a S400/B2 wheel.
Hopefully I can get a bigger wheel put in there...if not, I'll just have to make do with faster spool only, Darn
Coolest part of the whole deal is is should be about the same price as a B2
Chris
#20
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
Chris, That looks like it should work just fine....you got the 757707-9 with the T-6 inlet right. Can't wait till you get that built up.
Luken, Brett's truck with the SB/BB twins did the 1/4 in 12's with two big let offs and coasting across the line....same as me he had a hard time keeping it on the track when he was spinning 3 corners in 4wd on the 2/3 and 3/4 shifts. Mine was bad enough with just 2 corners spinning. He wrecked the big brother at the Edge though because of a defective friction ring. ks
Luken, Brett's truck with the SB/BB twins did the 1/4 in 12's with two big let offs and coasting across the line....same as me he had a hard time keeping it on the track when he was spinning 3 corners in 4wd on the 2/3 and 3/4 shifts. Mine was bad enough with just 2 corners spinning. He wrecked the big brother at the Edge though because of a defective friction ring. ks
#22
Registered User
Join Date: Aug 2003
Location: Jeffersonville, Ohio
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Actually, those are for the GT42's...mine is a 45. Different turbine wheel
I believe I can actually go clear down to a .91A/R housing...but I'm gonna go with the 1.15A/R T6 inlet. My charger is just a center section and wheels right now, no housings.
As soon as I get a tranny, the twins build begins...probably be after the first of the year, though
Chris
I believe I can actually go clear down to a .91A/R housing...but I'm gonna go with the 1.15A/R T6 inlet. My charger is just a center section and wheels right now, no housings.
As soon as I get a tranny, the twins build begins...probably be after the first of the year, though
Chris
Thread
Thread Starter
Forum
Replies
Last Post
kantdrive55
Performance and Accessories 2nd gen only
33
01-17-2007 05:21 PM
satburn
Performance and Accessories 2nd gen only
20
10-02-2006 12:21 AM
More Power
Performance and Accessories 2nd gen only
3
09-17-2004 04:09 PM