Keep running the TST-Twins or is there something better?
01-13-2014, 05:53 PM
#1
Registered User
Thread Starter
Keep running the TST-Twins or is there something better?
Been running a TST twins and mp8 for about 100k miles.
Well the p0148 code came one last week and the rail relief sensor was leaking so I it replaced as well as the rail pressure sensor. Probably won't be putting the MP-8 back on.
Being that I haven't been looking at boxes or programmers in the last 8 years, what's the "favorite" right now?
The TST works fine, but curious if there is something better.
Well the p0148 code came one last week and the rail relief sensor was leaking so I it replaced as well as the rail pressure sensor. Probably won't be putting the MP-8 back on.
Being that I haven't been looking at boxes or programmers in the last 8 years, what's the "favorite" right now?
The TST works fine, but curious if there is something better.
01-13-2014, 06:47 PM
#2
Registered User
Join Date: Aug 2007
Location: MItten
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
There is absolutely something better. I recommend EFILive. Get the Flash Scan and either tune it yourself or buy tunes from a tuner like Zach at Starlite Diesel or Les Szmidt.
01-14-2014, 10:24 AM
#4
DTR 1st Sergeant
^^^ x2 the above.
I still run my smarty/tst stack, but the smarty does 99% of the work as it is much better at the task.
Look at the smarty UDC... I have not tried it yet but seems to be the next best thing to EFI live.
I still run my smarty/tst stack, but the smarty does 99% of the work as it is much better at the task.
Look at the smarty UDC... I have not tried it yet but seems to be the next best thing to EFI live.
Thread
Thread Starter
Forum
Replies
Last Post
dodgediesel
3rd Gen High Performance and Accessories (5.9L Only)
17
04-05-2011 11:21 AM
Stock 02
Performance and Accessories 2nd gen only
28
09-24-2006 11:09 AM