Just finished installing Flares!
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sherwood Park, Alberta
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Just finished installing Flares!
I just finished installing my painted bushwacker flares. I think they look pretty narly. What yah think?
before and After photos.
before and After photos.
#5
Brrrrr....
You guys already have A LOT of snow! Is it true that WINTER is a 6 month long season where you are at????
By the way, the flares look GOOD!!
I went with the ATS flares...
FLARES should comes STOCK on these trucks!! Toyota and Chevy trucks come with them from the factory!!!
You guys already have A LOT of snow! Is it true that WINTER is a 6 month long season where you are at????
By the way, the flares look GOOD!!
I went with the ATS flares...
FLARES should comes STOCK on these trucks!! Toyota and Chevy trucks come with them from the factory!!!
#6
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sherwood Park, Alberta
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
It's actually not that cold, by my standards it +4c,39f. Winter usually hits about Nov1 and lasts until early april. We have already had -21c, -6f. I bought them at my local truck accessories shop, they are the bushwacker pocket flares,$650CDN, Painted and 3M mylar coating on the bottom $360 cdn. They were a snap to install,removing the cummins emblems was a real pain, searched the topic prior, and jmo but wd 40 wouldn't touch the adhesive. And just becareful drilling the holes for the bolts, I marked up a couple spots with the bit , and I thought the body shop would touch them up before painting, but they didn't. The whole reason I bought them was to keep the truck clean, with the bigger tires, I couldn't believe how quickly it got dirty.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sherwood Park, Alberta
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Yah, I knew I got those two mixed up didn't feel like messing around editing ....and as far as I know...thats a stock grill, at least mine came with it...
#14
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sherwood Park, Alberta
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Your MC looks great, here are some pics of mineAttachment 8884.
Long horn, They are 315 55 r20, but those 20 inch motometals come with a lot of offset, with no lift they wouldn't fit , I still get a little rubbin. I tried 35 mickey thompson's and they looked sweet but I would've needed another 2 inch of lift and then I wouldn't fit in my garage...up here when it's -40c ...you want a garage.