OldSmokey

Anyone know of anyway to run a jacobs exhaust break and twin turbos, or any kits that work with exhaust breaks that mount to the turbo? Thanks Joel

RyeThomas

Some companies have a remote mount kit, look for one of those.

OldSmokey

Thanks Rye, I checked around and wasnt too sucessful do you know which companies sell these kits? Thanks Joel

cbrahs

I got a call from PacBrake a couple months ago and they said they are working on a set that will bolt right up to the ATS twins. Replaces the cast elbow that comes on the truck stock and has 5in outlet.

OldSmokey

Do you know if packbrake and jacobs use the same elbow from the turbo?

cbrahs

I would call PacBrake and aske them directly what your plans are and what you have. THey have been nothing but helpful on the questions I asked them and did not hesitate to call me back when I left messages.

RyeThomas

The only place I have seen one for sure was BD (I think). But I was under the impression these units were common due to alot of people changing their turbo and exhaust. Shows ya what I know .

Totallyrad

Google down stream exhaust brakes and see if that helps. You'll find a little reading there.

Harold-Pacbrake

Give TJ a call here at 1-800-663-0096 he can put together something for you, a inline mount is no problem, we can go up to a 5" PRXB, depending on your turbos a direct mount might be harder to do, but TJ can figure something out for you.

Homer S.

I think he wants to keep using the jacobs brake that's already on his truck-if I'm not mistaking.

OldSmokey

Yah, since ive already got the jacobs thats why im asking. I may just decide to loose the exhaut brake if it ends up expensive.