I dynoed my truck yesterday @ Scheids.....
#5
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I really just wanted to break 600hp. I didnt think I would be close to 700.
Yes, one turbo and PUMP DIESEL! no additives what so ever.
#7
Registered User
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,627
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Great numbers, I would like to see a run minus the cam and springs just to see the differance. I would think the dual fuelers made a large differance also vs a single modded pump
#11
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
Justin, Great looking dyno graphs and nice power .... did you get boost as high as when you pull? Having seen your videos of the truck pulling the graphs seem like they match it....smooth power. Congrats, Kerry
#12
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys once again!
Kerry,
I didnt ask David about the boost during the dyno runs however the turbo was singin' pretty good during the first several runs.
I havent looked at my boost gauge during a pull for a couple years so I dont really know how either compares.
Kerry,
I didnt ask David about the boost during the dyno runs however the turbo was singin' pretty good during the first several runs.
I havent looked at my boost gauge during a pull for a couple years so I dont really know how either compares.
#15
I didn't do too bad on the dyno at Scheid either. You must have been there later in the day as I didn't see you run.
My engine is brand new and I really had no chance to do and tuning to it. My speed limiter held th truck back from seeing over 600hp. I was still able to put down...
591hp 1173tq
You may have seen my name up on the chart... I made the third run Friday morning.
I hope to have some better number here in a couple weeks and the Mopar event in Commerce. Dave's dyno runs are free there !!
very nice numbers you have there for sure. All I heard from the Scheid folks and Dave was how only a few years back 300 to 400hp was some extreme power and it blows them away to see the numbers being put down now.
My engine is brand new and I really had no chance to do and tuning to it. My speed limiter held th truck back from seeing over 600hp. I was still able to put down...
591hp 1173tq
You may have seen my name up on the chart... I made the third run Friday morning.
I hope to have some better number here in a couple weeks and the Mopar event in Commerce. Dave's dyno runs are free there !!
very nice numbers you have there for sure. All I heard from the Scheid folks and Dave was how only a few years back 300 to 400hp was some extreme power and it blows them away to see the numbers being put down now.