3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

How much horsepower?

Thread Tools
 
Search this Thread
 
Old 03-20-2007 | 02:48 PM
  #1  
Justin26's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 149
Likes: 0
From: Fairfield Texas
How much horsepower?

I just added the edge with the bullydog and it woke it up. Great low end power like everyone said. I am running the bullydog on performance and the edge ez on the middle setting. How much horsepower do u guys think i have when everything is turned up. What is the next step for me to do to the truck? Clutch im guessing but it is not slipping even on extreme. Any more perfomance mods I can do to the truck?
Old 03-20-2007 | 02:55 PM
  #2  
JD Dearden's Avatar
Banned
 
Joined: Apr 2006
Posts: 1,841
Likes: 0
From: Been deported back to Utah
Originally Posted by Justin26
I just added the edge with the bullydog and it woke it up. Great low end power like everyone said. I am running the bullydog on performance and the edge ez on the middle setting. How much horsepower do u guys think i have when everything is turned up. What is the next step for me to do to the truck? Clutch im guessing but it is not slipping even on extreme. Any more perfomance mods I can do to the truck?
Before you get the clucth you are going to want to know how much power you plan on runin through the truck so you can match up the correct clutch, and I would say use that one until it goes or gets bad. And as far as more mods you are just beginning.
Old 03-20-2007 | 03:18 PM
  #3  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
what JD Dearden said.....

Upgrade to Crazy Larry

Add a Quadzilla Boost Fooler

Upgrade lift pump
Old 03-20-2007 | 03:47 PM
  #4  
Justin26's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 149
Likes: 0
From: Fairfield Texas
Im shooting for 500hp. Just curious what else I need to do to get there.
Old 03-20-2007 | 03:49 PM
  #5  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
Originally Posted by Justin26
Im shooting for 500hp. Just curious what else I need to do to get there.
Crazy Larry, a boost fooler, and a lift pump may put you VERY near 500hp.
Old 03-20-2007 | 03:50 PM
  #6  
Justin26's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 149
Likes: 0
From: Fairfield Texas
I will try the crazy larry, and where does the boost fooler hook up? I was told the edge ez had one with it. By the way my truck is way quiet even with the muffler off. I think I am fixing to take the cat off. Will it change how loud it is at idle. Dont wanna **** the neighbors off too bad.
Old 03-20-2007 | 03:53 PM
  #7  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
Originally Posted by Justin26
I will try the crazy larry, and where does the boost fooler hook up? I was told the edge ez had one with it. By the way my truck is way quiet even with the muffler off. I think I am fixing to take the cat off. Will it change how loud it is at idle. Dont wanna **** the neighbors off too bad.
Edge EZ from my experience does not allow for more boost than stock...the Boost Fooler does. The Quadzilla Boost Fooler plugs into the MAP sensor, put it in first, followed by the EZ.

removing the cat will totally change the sound of your truck. period.

Last edited by 973604x4; 03-20-2007 at 03:54 PM. Reason: add info
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mwlu711
1st Gen. Ram - All Topics
60
08-11-2007 08:59 PM
OrangeCounty12V
Performance and Accessories 2nd gen only
2
07-03-2007 11:24 AM
orangebeast
Performance and Accessories 2nd gen only
36
08-25-2006 07:17 AM
marv h.
Performance and Accessories 2nd gen only
16
09-20-2005 05:51 PM




All times are GMT -5. The time now is 02:36 PM.