Has anyone made a splash shield for the front spring area?
02-01-2010, 04:27 PM
#1
Registered User
Thread Starter
Has anyone made a splash shield for the front spring area?
I had the turbo and waste gate replaced in the fall under warranty do to it rusting. Has anyone made a splash shield for the front spring area? The front fender liners don't cover the bottom near the spring and axle well. On my older cars and trucks there would be a rubber skirting there to keep the splashing off the lower engine components.
A couple of bucks worth of rudder from the factory would have save a grand or so on the turbo.
A couple of bucks worth of rudder from the factory would have save a grand or so on the turbo.
02-01-2010, 08:13 PM
#3
Registered User
Join Date: May 2007
Location: az
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
these are for body lifts. but they could be cut to fit.
http://www.performanceaccessories.com/catalog/dodge.htm
here is the right page for your truck.
https://www.shopatron.com/products/p...11.32365.0.0.0
http://www.performanceaccessories.com/catalog/dodge.htm
here is the right page for your truck.
https://www.shopatron.com/products/p...11.32365.0.0.0
Thread
Thread Starter
Forum
Replies
Last Post
PapaPerk
3rd Generation Ram - Non Drivetrain - All Years
1
06-08-2010 09:17 PM
randy.pratt
3rd Generation Ram - Non Drivetrain - All Years
4
10-21-2008 07:43 PM
hovisimo
3rd Generation Ram - Non Drivetrain - All Years
2
01-11-2007 04:33 PM
Cowboy45
3rd Gen High Performance and Accessories (5.9L Only)
6
11-19-2006 01:13 AM