Going to the track 2wd or 4wd?
#1
Going to the track 2wd or 4wd?
What is the best way to get good numbers at the track? I can either feather the pedal in 2wd until I get going and let it rip or do a boosted launch in 4wd.
What do you guys think is best? Thanks, Tom J.
What do you guys think is best? Thanks, Tom J.
#4
Registered User
I use 4hi 4wd and 15-20psi launches. Just leave it in 4hi until you are slowing down, then shift to 2hi before you turn off. It wont release anyway until you slow down.
Try it both ways and I think you will wind up in 4hi. Without drag radials and traction bars I had no way to hook up quick enough to run a good time in 2wd.
Try it both ways and I think you will wind up in 4hi. Without drag radials and traction bars I had no way to hook up quick enough to run a good time in 2wd.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Jordan5687
Performance and Accessories 2nd gen only
5
02-18-2009 02:48 PM
VikingDiesel
Competition / Pulls / OffRoad
6
12-29-2006 07:17 PM
95black2615
2nd Gen. Dodge Ram - No Drivetrain
10
12-20-2006 06:37 PM
1320
Towing and Hauling / RV
6
05-06-2003 06:30 PM