gitner done LOL
11-12-2007, 07:59 PM
#1
Registered User
Thread Starter
Join Date: Jan 2006
Location: swinging wrenches in MD
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
gitner done LOL
Went and did some private dyno sessions today. Last month we did 1125 Hp with the hobbs switches activating the nitrous. After taking the advice of Doug Smith, I installed an NX progressive controller to bring the nitrous in a lot softer since it was too aggressive the way it was. The results were the calculated TQ was lower from the ramp up of nitrous, but we were able to squeeze out an additional 20 Hp on the top end. I will attach the shot of the dyno runs that I took with my camera. Once the run files are emailed to me, I will upload an attached graph that will be easier to view. Also, we should have the vid up shortly on you tube. 
Trending Topics
11-12-2007, 08:23 PM
#9
Banned
Went and did some private dyno sessions today. Last month we did 1125 Hp with the hobbs switches activating the nitrous. After taking the advice of Doug Smith, I installed an NX progressive controller to bring the nitrous in a lot softer since it was too aggressive the way it was. The results were the calculated TQ was lower from the ramp up of nitrous, but we were able to squeeze out an additional 20 Hp on the top end. I will attach the shot of the dyno runs that I took with my camera. Once the run files are emailed to me, I will upload an attached graph that will be easier to view. Also, we should have the vid up shortly on you tube.
11-12-2007, 09:08 PM
#13
Registered User
Join Date: Sep 2007
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
So based on the time when you text messaged me and when you posted this thread, you must have been texting me with your left hand and typing this post with your right....
As Allways Awsome #'s !!!!!!
As Allways Awsome #'s !!!!!!
11-12-2007, 09:17 PM
#14
Registered User
Thread Starter
Join Date: Jan 2006
Location: swinging wrenches in MD
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
