Fold-a-cover with Factory Bedliner?
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: Cocoa, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Fold-a-cover with Factory Bedliner?
Has anyone installed a foldacover on a truck with the factory drop in liner?
I didn't want the drop in, but I wanted an '05 - this was the only Laramie in the state and the dealer had already installed the dropin for another purchaser who then backed out. I had to pay extra for it and didn't even want it!
I was looking to have the tailgate done in Line-x since I can see the scratching going on under the lip, but was thinking maybe keep the factory drop in. Anyone that's installed a foldacover with the drop in please chime in. Wanted to know if you had to cut the section that overlaps the bed near the cab. If not did you get a good water proof/resistant seal?
Thanks in advance.
Ryan
I didn't want the drop in, but I wanted an '05 - this was the only Laramie in the state and the dealer had already installed the dropin for another purchaser who then backed out. I had to pay extra for it and didn't even want it!
I was looking to have the tailgate done in Line-x since I can see the scratching going on under the lip, but was thinking maybe keep the factory drop in. Anyone that's installed a foldacover with the drop in please chime in. Wanted to know if you had to cut the section that overlaps the bed near the cab. If not did you get a good water proof/resistant seal?
Thanks in advance.
Ryan
#2
I have an A.R.E. bed cover with an over-the-rail bed liner. There were no issues on the installation and the water resistant/proof seal was garaunteed just as with no liner. Hope this helps.
#4
Registered User
Thread Starter
Join Date: Dec 2005
Location: Cocoa, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Wanted to specify, I'm looking to install with a factory under the rail liner which only protrudes above the rail near the cab and on the tailgate. Seems that there's going to be a gap as the cover tries to seal all the way around.
Ryan
Ryan
#6
Registered User
Thread Starter
Join Date: Dec 2005
Location: Cocoa, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by adventuris
hi ryan , i have fold- cover with liner , you need to cut lip of front of liner , tailgate piece is fine .
steven
steven
Thanks for the reply. That's what I figured. I posted my drop in for sale in the classifieds, but I get the impression not many folks really like them. If I can sell it I'll get Line-x throughout (can't see throwing it away), otherwise I'll cut it and install the cover.
Thanks,
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
reidry
3rd Gen High Performance and Accessories (5.9L Only)
4
08-28-2006 02:24 PM
reidry
3rd Gen High Performance and Accessories (5.9L Only)
3
08-20-2006 08:35 PM
Planetcat
3rd Gen High Performance and Accessories (5.9L Only)
2
11-04-2005 10:01 PM
Badd Dogg Guy19
3rd Gen High Performance and Accessories (5.9L Only)
8
07-13-2005 09:28 AM
Badd Dogg Guy19
3rd Gen High Performance and Accessories (5.9L Only)
17
05-27-2005 12:43 PM