Exhaust Stack + Carwash =
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Wisconsin
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Stack + Carwash =
I would like to put a single stack in (roof height) but I run the truck through the wash about twice a week. What kind of issues is this going to bring up?
Does anyone have experience with this????????
What to do....................... What NOT to do.....................
I can not stand to hand wash it myself and the high school kid up the block wants more than the monthly membership at the local full service wash!!!!
Does anyone have experience with this????????
What to do....................... What NOT to do.....................
I can not stand to hand wash it myself and the high school kid up the block wants more than the monthly membership at the local full service wash!!!!
#2
Banned
Join Date: Apr 2006
Location: Been deported back to Utah
Posts: 1,841
Likes: 0
Received 0 Likes
on
0 Posts
Aint gonna happen unless you get something to cover it when in the wash, if you do go through you will need to wash again due to the black slug everywhere.
#3
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 7 Likes
on
5 Posts
i would not imagine it would be all that good on the stack when the brushes are pounding it. seems to me that it would try to rip the stack out of the pipe. you would have to have a killer stack mount. I know tritont has some awesom stack clamps.
#5
yep... just took my truck through a Automated carwash with the 7" single..I kept my engine reved to about 1800 rpm while I drove through and had ZERO soot on my truck when I was done
I have been scared to do it since I installed the stack...I even made a thread about it a few months ago
I wish I would have tried it sooner
this is a chaindrive style carwash with chamie(sp?) brushes
I have been scared to do it since I installed the stack...I even made a thread about it a few months ago
I wish I would have tried it sooner
this is a chaindrive style carwash with chamie(sp?) brushes
Thread
Thread Starter
Forum
Replies
Last Post
itr.#1446
NJDTR #37
2
12-07-2009 11:36 PM
B.Law
3rd Gen High Performance and Accessories (5.9L Only)
16
04-22-2005 02:28 PM
Cat Cracker
3rd Gen Engine and Drivetrain -> 2003-2007
2
07-14-2003 12:17 PM