Edge Jammer Injector Tips
#95
Registered User
Join Date: Jan 2005
Location: Canada
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
i installed mine, but i only got to run them a day, went to a dyno run, after putting them in, i was running out of fuel, was going to order a bigger lift pump, mine wasn't keeping up any more. i have since lost the truck to a shop fire.
these made it noisy,it didn't sound right to me but to every one else who has put injectors in said it was normal.
these made it noisy,it didn't sound right to me but to every one else who has put injectors in said it was normal.
#97
Registered User
Join Date: Jan 2005
Location: Canada
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
i'm sure they are fine, i ran 2 filters, pulled my stock injectors out with 370,000kms on them without a problem, i run clean diesel and never had a problem, some guys have changed injectors a few times, and their trucks might not ever see the miles mine did on stock injectors.
either way they seemed to work good, but on the dyno, at about 2200rpm, i ran the fuel psi to 0, you could hear it ramp up on the dyno, pulling really hard then flat line. i never noticed the gauge the first time round, cause i was super excited to be on the dyno finally, then i watched it hit 0 psi the second run. the guy there running even said somethign to me about it ramping up fast then flat lining.
if you got a good lift pump and cp3, you good to go, i just hated the extra noise they made.sounded like timing rattle. i had a post on here about it. haven't been checking back to much since loosing my truck.can't find another one either.
either way they seemed to work good, but on the dyno, at about 2200rpm, i ran the fuel psi to 0, you could hear it ramp up on the dyno, pulling really hard then flat line. i never noticed the gauge the first time round, cause i was super excited to be on the dyno finally, then i watched it hit 0 psi the second run. the guy there running even said somethign to me about it ramping up fast then flat lining.
if you got a good lift pump and cp3, you good to go, i just hated the extra noise they made.sounded like timing rattle. i had a post on here about it. haven't been checking back to much since loosing my truck.can't find another one either.
#98
Registered User
Join Date: Mar 2006
Location: Kelliher, Saskatchwan, Canada
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys. I just installed mine a few weeks ago and no probs. They are a bit more noisier than stock but the power is great. Im runnign out of fuel i know that much but the power and torque is much better. I also got another 1mpg out of them but i keep my foot into it so its not that much better. I got 75hp ones and im thinkin that im gonna order the bag of parts to upgrade with for now as i dont really plan on much more except some more air and thats about it. I will finally have to replace my clutch as it slips now but didnt before.
#99
Registered User
Join Date: Feb 2005
Location: Northeast Ohio
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
I think I'm gonna go this route. If any of you with these have problems, be sure to post
Dodger Bomber
Now just fix your sig. :-) "Edge Jammer Satge 2 Nozzels"
Dodger Bomber
Now just fix your sig. :-) "Edge Jammer Satge 2 Nozzels"
#100
Registered User
Join Date: Mar 2006
Location: Kelliher, Saskatchwan, Canada
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Will do. I will say this much about the nozzels, they sound like a timing rattle but i know it isnt as i can change the smarty and ez settings and it stays the same. I also find that my EGTS didnt go up much, maybe another 100* at WOT. And yes i will change my sig just for you.
Thread
Thread Starter
Forum
Replies
Last Post
BADBOWTIE
3rd Gen High Performance and Accessories (5.9L Only)
5
04-21-2008 09:00 PM
xOmertAx
Performance and Accessories 2nd gen only
20
02-17-2007 09:52 PM
9 sec camaro
Performance and Accessories 2nd gen only
20
08-26-2006 01:30 PM
deezulsmoke
3rd Gen High Performance and Accessories (5.9L Only)
6
09-14-2005 10:25 AM
Ocmechanx
Performance and Accessories 2nd gen only
4
01-14-2005 10:10 AM