Edge EZ Box question (again)
#18
Registered User
Join Date: Feb 2005
Location: Florida East Coast
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I have the Edge EZ box, it only has 3 settings (did the old ones have 4?) also I read in this thread that you have to open the hood to change the setting? Mine has a toogle switch that you mount in the cab. Maybe they changed them?
#20
Registered User
Join Date: Jan 2006
Location: Los Angeles, CA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
The power on the Edge EZ comes on in the higher RPM range? I have the Bully Dog Power Pup right now. I like the extreme setting on the highway but around town it is way too smokey. I would like a pressure box that only comes in at higher RPM's to keep the smoke down.
#21
Registered User
Join Date: Aug 2002
Location: Northern Virginia
Posts: 8,803
Likes: 0
Received 0 Likes
on
0 Posts
Sorry Pourindiesel. I misunderstood your statement.
The 03-04 EZ comes with 4 settings that they tell you about. Some have the secret 5th setting that they don't advertise. Some of the first EZs even have a 6th setting! Those top two settings raise rail pressure above it's limits and will cause problems if you run them too long. Mine had # 5 setting and after a couple months of running mine there I blew the gasket on the pressure relief valve. No big deal though. A $2.00 part that was very EZ to replace...
The 03-04 EZ comes with 4 settings that they tell you about. Some have the secret 5th setting that they don't advertise. Some of the first EZs even have a 6th setting! Those top two settings raise rail pressure above it's limits and will cause problems if you run them too long. Mine had # 5 setting and after a couple months of running mine there I blew the gasket on the pressure relief valve. No big deal though. A $2.00 part that was very EZ to replace...
#23
Registered User
my dad runs a edge ez (the one with the 3 position toggle switch) and a bully dog power pup hes had problem with 3 injectors already and truck is pretty rattly right now so it prob has another injector gone. I think hes gonna get rid of the ez and go with stacking a tst with the bdpp
Thread
Thread Starter
Forum
Replies
Last Post
Havic801
3rd Gen High Performance and Accessories (5.9L Only)
5
11-16-2011 02:34 PM
Steven K
3rd Gen Engine and Drivetrain -> 2007 and up
4
06-04-2009 10:32 AM
04ctd
3rd Gen High Performance and Accessories (5.9L Only)
2
10-05-2006 08:27 PM
coobie
3rd Gen High Performance and Accessories (5.9L Only)
25
02-23-2005 04:05 PM