Dyno Guesses ?
03-16-2009, 06:43 PM
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: new jersey
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Guesses ?
guys hitting the dyno again tomorrow, last time it was 653 in sw9.this time ive added a mp-8, a stage3 floor it,springs,and adjusted the twins to push 62psi, instead of 52psi.also last time i was only able to hold 19,000 for r/p in sw9.thanks
03-16-2009, 07:56 PM
#3
Registered User
Join Date: Mar 2007
Location: SF Bay Area
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
700hp would be sweet, you and I have about the same setup. Does it "feel" 50hp faster now with the new additions? I'm dynoing in a week or two, it will be interesting to compare.
03-17-2009, 01:10 PM
#6
Registered User
Thread Starter
Join Date: Mar 2008
Location: new jersey
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
just got back from dyno,my settings were sw3, sw7,and sw9 run's.i backed off on the timing a little because of all this to much timing talk latley.timing3 insted of 2.and i also replaced the meth with all water, so i lost 22hp right there, and had the mp-8 on 30 to 40 %.sw3 was 619hp,sw7 was 660hp, and sw9 was 683hp.i feel very confident that i could of squeezed another 25 hp easy with the meth, mp-8 turned up a little more, and or the timing put back to 2.all in all im very happy.
Trending Topics
03-18-2009, 07:54 AM
#14
Registered User
Thread Starter
Join Date: Mar 2008
Location: new jersey
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
im not to sure big blue, i wasnt driving the truck on the dyno, but i do know now that r/p isnt a problem at all with the new stage3 floor it.i can hold 26.500 in any sw now.also left a little HP on the table by running just water, and keeping the mp-8 at 30%