Don's flux 2 sticks..no extra power..need some advice
#1
Don's flux 2 sticks..no extra power..need some advice
do yall think because of my modded stage 3 pump i am not gettin enough fuel with my AD100 to the cp3 pump is why i am not seeing hardly no power diff with my flux 2 sticks..need some pointers guys..lot of $$$ in sticks for no extra power
#2
Registered User
Join Date: Aug 2005
Location: Dallas TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
wow, first I've read about that. I have mine still sitting at Don's to be shipped/installed. Anyway, I would say that its possible that your AD100 might not be flowing enough, but if thats the case then Im in for a new pump as well. Im running the stock CP3 and a GDP392, so I would think that the AD100 and GDP 392 are similar in output....but maybe not.
Maybe some of the more knowledgeable members will chime in soon......I'll be following this one.
Maybe some of the more knowledgeable members will chime in soon......I'll be following this one.
#5
wow, first I've read about that. I have mine still sitting at Don's to be shipped/installed. Anyway, I would say that its possible that your AD100 might not be flowing enough, but if thats the case then Im in for a new pump as well. Im running the stock CP3 and a GDP392, so I would think that the AD100 and GDP 392 are similar in output....but maybe not.
Maybe some of the more knowledgeable members will chime in soon......I'll be following this one.
Maybe some of the more knowledgeable members will chime in soon......I'll be following this one.
#7
yes I had stock injectors bfore...rail pressure is at 26,500 then falls into the low 20's.....but I have Johns modded stage 3 pump do you think my AD100 is gettin enough fuel to the CP3...i know the AD100 orange light comes and starts blinking when you hammer down on it...i havent checked my fuel pressure yet...surely to goodness i should tell a diff with youre flux 2 injectors in their not??
Trending Topics
#8
Registered User
Join Date: Aug 2005
Location: Dallas TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
Well from what I've read on here you need to monitor your FP and RP to be able to find out where the lack of fuel is coming from. Makes sense that if the FP is good, that the rail pressure must be lacking and therefore your pump cant hang.
#9
#11
DTR Advertiser
I would think gettting the fuel pressure issue cleared is the first step.
Going from a stock injector to a 2.5 is a big step. Certainly it should be easily noticed.
Going from a stock injector to a 2.5 is a big step. Certainly it should be easily noticed.
#12
are you the guy that did them??..i went through John at floor-it-diesel...i am gonna upgrade to the AD150 and put a fuel pressure gauge on the truck and then see wat it does...if they still aint no extra power i will have to pull em back out and send back to you and let you look at them....thanks guys
#13
Registered User
Join Date: Aug 2005
Location: Dallas TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
Yes Don is the man behind the F1 products. If they are not right, which they should be, Im sure he'll help you fix them. I'd look at your fueling problem first.
BTW, what type of light are you refering to that comes on when the FP is below 5psi? Is this something that is on the 03-04 555's too?
BTW, what type of light are you refering to that comes on when the FP is below 5psi? Is this something that is on the 03-04 555's too?
#14
Registered User
Join Date: Aug 2007
Location: mankato,mn
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
not to steel the thread but don,how much should a set of 2.5 smoke,mine were the ones you changed from ddp 90s last fall?? I know theyre much better but used to the smoke from the90s,and these should be arond 125hp range. thanks Luke