3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

? For Don M...

Thread Tools
 
Search this Thread
 
Old 01-31-2008 | 07:41 PM
  #1  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
Question ? For Don M...

I was wondering if you could injectors from a marine engine in a 305/555 engine, the injectors came out of a engine with a horespower rating of 380hp, and are the spray pattern different. Thanks....Jon
Old 01-31-2008 | 08:07 PM
  #2  
Kman9090's Avatar
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
At taht much fuel your spraying in there it would take an extreme turbo to burn that off. I think you would be changing oil after every run since you would probably wash out your cylinders every time.
Old 01-31-2008 | 09:16 PM
  #3  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
its only 75 more hp then my engine now
Old 02-01-2008 | 01:14 PM
  #4  
C Schomer's Avatar
Registered User
 
Joined: Feb 2005
Posts: 1,714
Likes: 1
From: Pueblo West
I think the bigger issue would be if they will work right with your piston bowls. Craig
Old 02-01-2008 | 10:19 PM
  #5  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
ya thats what im worried about
Old 02-01-2008 | 11:07 PM
  #6  
CReed's Avatar
Banned
 
Joined: Jan 2007
Posts: 1,616
Likes: 0
From: Cleveland, Tx/ Huntsville, Tx
Have you compared the two side by side. The common rail cummins marine injectors I have seen have had a longer injector body then our truck, the top solenoid looks to be the same as does the bottom half of the injector body and nozzle just longer. The spray pattern I would imagine might be a tad off as well and we wouldnt want that.
Old 02-01-2008 | 11:11 PM
  #7  
displacedtexan's Avatar
Banned
 
Joined: Apr 2005
Posts: 3,337
Likes: 0
From: Place with no quail:(
Not exactly the same, but 12v guys have been running marine injectors with the wrong spray pattern for decades (155* instead of 145*) with no damadge. They are smoky though.

Even though there are many newer, better options many still run them because they are good bang for the buck.
Old 02-01-2008 | 11:17 PM
  #8  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
Ya i forgot the 12v use marine style injectors, i still might try them out since they where free, and i have a coulple extras to mess with.
Old 02-02-2008 | 12:02 AM
  #9  
CReed's Avatar
Banned
 
Joined: Jan 2007
Posts: 1,616
Likes: 0
From: Cleveland, Tx/ Huntsville, Tx
Post up some pictures of them.
Old 02-02-2008 | 11:07 AM
  #10  
revolution_dsl's Avatar
Registered User
 
Joined: Oct 2007
Posts: 179
Likes: 0
From: Rossville, IN
watching this...
Old 02-02-2008 | 11:44 PM
  #11  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
Ill post some pictures for yall tomorrow
Old 02-03-2008 | 08:42 PM
  #12  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL

There's a picture of one of the injectors
Old 02-04-2008 | 02:14 AM
  #13  
Kman9090's Avatar
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
Oh I thought you meant 380hp over the stock 305. Most injectors are based on the horspower they have over stock. Sorry about that, I wonder if those amrine injectors have the failure rate of the ones in our engines. Another one of my buddies is making oil and white smoke. Number 2 injector is shot. I think he caught it before he wipe out the piston so far. I trashed my motor because of it.
Old 02-04-2008 | 06:43 AM
  #14  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
So far we havent had any injectors fail in a boat, i guess if i cant find out if they will work looks like ill be putting marine pistons in my truck so i can use them
Old 02-04-2008 | 09:56 PM
  #15  
04DEEZELRAM's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
bump...................


Quick Reply: ? For Don M...



All times are GMT -5. The time now is 12:28 AM.