Boost, Tranny, and Pyro install tomorrow...Need suggestions
#1
Registered User
Thread Starter
Join Date: Jan 2006
Location: College Station, Tx
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Boost, Tranny, and Pyro install tomorrow...Need suggestions
Im installing my Di Pricol Optix gauges tomorrow and im feeling kind of lost. Anyone have suggestions on the best wires to tap, where the tranny temp sensor goes, and any other bits that might help? I would really appreciate it. Thanks, Jason
#2
Registered User
Join Date: Jan 2003
Location: Justin, TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I would suggest dropping the turbo a little when drilling and tapping for the pyro.
When I went to tap my manifold last month, the tap broke and almost ended up in the turbo. I took all of the precautions, except dropping the turbo. I have drilled and tapped ~15 for myself and others and never had a problem until this last time. It was however enough to make me rethink my approach.
When I went to tap my manifold last month, the tap broke and almost ended up in the turbo. I took all of the precautions, except dropping the turbo. I have drilled and tapped ~15 for myself and others and never had a problem until this last time. It was however enough to make me rethink my approach.
Thread
Thread Starter
Forum
Replies
Last Post
ramtd02
3rd Gen High Performance and Accessories (5.9L Only)
9
10-12-2006 01:57 AM
Dave88LX
Performance and Accessories 2nd gen only
12
02-12-2006 10:29 PM
Mr. Jimmy
Performance and Accessories 2nd gen only
11
01-20-2006 03:51 PM
NoSparkplugs
1st Gen. Ram - All Topics
4
08-29-2005 10:31 PM