ATS Pulse Flow Exhaust Ports....
02-08-2009, 07:31 PM
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Indiana
Posts: 2,144
Likes: 0
Received 0 Likes
on
0 Posts
ATS Pulse Flow Exhaust Ports....
Any notice that the exhaust ports (and the mounting flange) on the ATS 2pc Pulse Flow manifold do not really match up to the size/shape of the exhaust gaskets (atleast when using the Cometic)??
I was thinking about laying the gaskets over the flanges/ports and outlining them with a marker, and then grinding them open to match the gaskets.....
Has anyone else notice this or has anyone else ported open the flanges to match the gaskets?
I was thinking about laying the gaskets over the flanges/ports and outlining them with a marker, and then grinding them open to match the gaskets.....
Has anyone else notice this or has anyone else ported open the flanges to match the gaskets?
Thread
Thread Starter
Forum
Replies
Last Post
ralphyboy
3rd Generation Ram - Non Drivetrain - All Years
10
01-17-2008 08:35 PM
8mpg
3rd Gen High Performance and Accessories (5.9L Only)
8
05-22-2006 01:35 PM
tfarmer96
3rd Gen Engine and Drivetrain -> 2003-2007
13
02-15-2005 05:56 PM