Any draw back to dual CP3's with stock.....
#16
Registered User
Join Date: Dec 2005
Location: Draper, UT
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
well according to Lloyd the dual cp3's only put out what the ECM tells it to..so even with dual's the pumps would still only put out what I ask...meaning if I run a smarty program with out pressure then I have no extra wear and tear.
in fact I should have less stress/wear on my cp3 cause I would have 2 pumps working at half there pumping power.
right?
in fact I should have less stress/wear on my cp3 cause I would have 2 pumps working at half there pumping power.
right?
#17
Registered User
Thread Starter
the pressure is only what the ECM demands..duals or not..now what I have read is duals ramp up faster but that still would not be a draw back imo
the over all Rail psi would be the same duals with a smarty or not.
we run higher RP on stock sticks all the time so why is this any different??
I am not arguing with you I just dont really see a difference
#18
I am not arguing just saying be careful. because you are putting more pressure to the injects more often (ramp up faster). i think you should get the springs and cam and the top half of your twin plans. Then injectors/cp3s/turbo.
#19
Registered User
I ran PPE's dual fueler with stock injectors and stock turbo for about 3,000 miles. It seemed to work fine. I know it's not a long term test... I could not tell any difference in rail pressure going from the stock cp3 to the twin cp3's. This is on my 05...
Paul
Paul
#20
Registered User
Thread Starter
thanks guys
#23
Mark Rock and roll with your plan!!! You should be fine as far as your injectors are concerned Just make sure you keep the fuel well filtered because the pressure will be for sure. The stock turbo will not see much of a difference because your sticks will now become the limiting factor. I say Do it.
Oh And I agree with Christian
Oh And I agree with Christian
#24
Registered User
Thread Starter
I dont know yet???? two stockers if it will get my goal of 900hp??
yeah I figured that much..thats why I want to do the springs, cam and evil twins....then sticks and turbos at the same time.
now to just talk the wife into it.................LOL
Will two stock pumps get me 900hp?????
Mark Rock and roll with your plan!!! You should be fine as far as your injectors are concerned Just make sure you keep the fuel well filtered because the pressure will be for sure. The stock turbo will not see much of a difference because your sticks will now become the limiting factor. I say Do it.
Oh And I agree with Christian
Oh And I agree with Christian
Will two stock pumps get me 900hp?????
#25
Registered User
Join Date: Jan 2006
Location: swinging wrenches in MD
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
#26
Registered User
Thread Starter
Big flux's=4.+?
Twins=Pius turbos(maybe)I have a couple versions and ideas but nothing is set yet..I know this will play a BIG role in my goal
F1 springs
Helix 2 cam
Evil twins dual CP3's
ARP 625+
Airdog150
Haisley HMR street Drag clutch
Smarty super tune
I am sure I am forgetting something else?????
suggestions????
#27
DTR Advertiser
Join Date: Sep 2002
Location: Va Beach,Va
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
You will be fine with stock sticks and dual cp3s. I have ran that way several times while my sticks were being upgraded.To get your 900 you may need bigger sticks than 4.xx with just a smarty. On turbos you will need at least a 80mm primary, probably bigger. I have seen mid to high 800s from a 80mm but never 900. This is uncorrected you add a 5-10 percent correction factor no problem. The rest of your mods look spot on. Tim
#28
Registered User
Thread Starter
You will be fine with stock sticks and dual cp3s. I have ran that way several times while my sticks were being upgraded.To get your 900 you may need bigger sticks than 4.xx with just a smarty. On turbos you will need at least a 80mm primary, probably bigger. I have seen mid to high 800s from a 80mm but never 900. This is uncorrected you add a 5-10 percent correction factor no problem. The rest of your mods look spot on. Tim
Thread
Thread Starter
Forum
Replies
Last Post
adamsmarshall
3rd Gen High Performance and Accessories (5.9L Only)
13
10-07-2008 06:54 PM
Jethro6213
3rd Gen High Performance and Accessories (5.9L Only)
19
07-11-2008 11:59 AM
streetsmoker
3rd Gen High Performance and Accessories (5.9L Only)
36
02-07-2008 07:16 PM
BADBOWTIE
3rd Gen High Performance and Accessories (5.9L Only)
28
07-14-2007 02:36 PM