Any AA9.25 MagHytec Diff covers out there ?
03-20-2006, 09:29 PM
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Chestermere, Alberta, Canada
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Any AA9.25 MagHytec Diff covers out there ?
Is there any one else out there with this setup yet. I realize i have a prototype model but it seems when hitting large bumps the upper control arm hits the pan. Its really too bad but it seems like this is the same scenario PML went through with their front cover. I was told the prototypes were the exact same thing as the productiion run. Does anyone else have this issue ? I'm not trying to rap on MagHytec but just want to get a solution in the works.
03-21-2006, 01:43 PM
#3
Registered User
Thread Starter
Join Date: Jan 2004
Location: Chestermere, Alberta, Canada
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
I guess no on will have the MH yet because the production run has not come out yet. Apparently the production units are a little different and have been notched where mine is hitting. I will wait for a new production run i guess. JFYI
Thread
Thread Starter
Forum
Replies
Last Post
cameroneod
3rd Gen High Performance and Accessories (5.9L Only)
9
07-05-2008 09:54 AM
MX429
3rd Gen Engine and Drivetrain -> 2003-2007
4
11-26-2007 04:47 PM
lowboy18011
3rd Gen High Performance and Accessories (5.9L Only)
4
05-06-2007 10:08 AM
KATOOM
Performance and Accessories 2nd gen only
9
05-23-2003 05:58 AM
SolidJunkMM
Performance and Accessories 2nd gen only
18
05-23-2003 01:55 AM