Another beat to death topic....exhaust
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: The Plywood state FL
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Another beat to death topic....exhaust
I have an 03 CTD and ive already put the geno's straight pipe on it and it was giving the semi trucks a run for their money noise wise! What im looking for is a complete system thats louder then stock but not as loud as straight pipe with out a cat. Im leaning toward MBRP but i hear there pretty loud. I dont want to turn this into a battle of the exhaust systems just give me some opinions based on what you all have run or are running presently.
thanks Russ
thanks Russ
#2
Registered User
Join Date: Feb 2005
Location: West Warwick, RI
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
MBRP Exhaust
Running the MBRP 409 dual cat back system. Cat in place. It's loud enough for me. Deeper and louder than stock, but not super loud. Tried the cat test pipe to lower EGT's but it was loud. Not so bad for day to day driving, but if you tow anything, and encounter any hills, very loud. I run empty 90% of the time but when I tow it's for hours on end, and it got way to loud. Would love to put a cut out so I could by pass the cat for regular duty then have it on when noise was too much. Love this set up. Loud enough to love, but quiet enough that the wife (future kids) won't mind.
#6
Registered User
Join Date: Aug 2005
Location: Oklahoma
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dodgetech77
Drew what level do you run your EZ on?
#7
Banned
Join Date: May 2003
Location: Nashvile Tennessee
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
dodgetech77,
You might try one of our MBRP performane replacement mufflers, on an 03 you'll need a 3.5 to 4.0 adaptor to connect to the 3.5 inch factory intermediate pipes. Everyone that has installed them likes the volume and sound/tone of it. They are 409 stainless and have the hangers welded to the muffler just like a stock system, makes for an easy install. The bolt right on to a 2004.5+ as they have the 4.0 inch intermediate pipe from the factory.
Mark @ DPPI
You might try one of our MBRP performane replacement mufflers, on an 03 you'll need a 3.5 to 4.0 adaptor to connect to the 3.5 inch factory intermediate pipes. Everyone that has installed them likes the volume and sound/tone of it. They are 409 stainless and have the hangers welded to the muffler just like a stock system, makes for an easy install. The bolt right on to a 2004.5+ as they have the 4.0 inch intermediate pipe from the factory.
Mark @ DPPI
Thread
Thread Starter
Forum
Replies
Last Post
725Gus
4th Gen Ram -Non Drivetrain- 2010 and Up
12
03-06-2014 09:49 AM
paroxysym
3rd Gen High Performance and Accessories (5.9L Only)
13
03-26-2008 02:02 PM
Lloyd Henry
3rd Generation Ram - Non Drivetrain - All Years
10
08-30-2007 10:38 PM
Jeremy Cusick
Competition / Pulls / OffRoad
4
03-23-2006 06:36 PM