After Debadge
#1
Registered User
Thread Starter
Join Date: May 2007
Location: Camp Pendleton, CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
After Debadge
I finally debadged my truck after some lengthy debates. I used some hemp rope that i borrowed from my sis and a 3m stripe off wheel i got at carquest. Napa was sold out, Checker didnt carry them and they never have anything. Cleaned it with some WD-40.Here are a couple before:
After a fresh wax and wash:
After a fresh wax and wash:
#4
Registered User
Join Date: Jul 2007
Location: Richmond VA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Looks good!
Just started it my self..(still says M 350 on one side in glue!....I will get'er in the AM.
I left the C.I just could not get myself to pull it off....
look'n sleek!
Just started it my self..(still says M 350 on one side in glue!....I will get'er in the AM.
I left the C.I just could not get myself to pull it off....
look'n sleek!
#6
Registered User
Join Date: Feb 2007
Location: San Antonio
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Looks good man. I love it when folks walk up to me and ask.."what is that? What engine is in that truck?" Or when I line em up and they think it is a baby V-8 (although with 5 inch exhaust what kinda moron would that be) and they get smoked (literally).
Trending Topics
#11
Registered User
Join Date: Apr 2006
Location: Austin, Tx
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
wow, sweet lookin truck. Does the WD-40 not hurt the paint? I used fishing line, my figners to get the black rubber stuff off and 3M adhesive remover (specified for emblems). But if the WD-40 is ok for the glue that's cheaper...
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.
#13
wow, sweet lookin truck. Does the WD-40 not hurt the paint? I used fishing line, my figners to get the black rubber stuff off and 3M adhesive remover (specified for emblems). But if the WD-40 is ok for the glue that's cheaper...
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.
The Eraser Wheel is this
http://www.astrotools.com/
type in part number 400E
#14
Registered User
Thread Starter
Join Date: May 2007
Location: Camp Pendleton, CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to all, I love the black too. It hardly ever looks this nice though, as i can't spend half my day cleaning the thing.
#15
Registered User
Thread Starter
Join Date: May 2007
Location: Camp Pendleton, CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
wow, sweet lookin truck. Does the WD-40 not hurt the paint? I used fishing line, my figners to get the black rubber stuff off and 3M adhesive remover (specified for emblems). But if the WD-40 is ok for the glue that's cheaper...
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.
And the wheel, what is that? Does it go on a drill? I looked at AutoZone and Advanced but neither had it nor did they know what i was talking about.