Adding a Dual Feed Line ON a Stock CP3???
#35
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, somehow I became unsubscribed to this thread so I lost it... Both ends of the hose are the same...they are female and fit onto the CP3...There is one adapter and it goes from the CP3 size to the rail relief valve size...Chris at Relentless has a Y that allows for a second feed line and the rail relief valve to be used...I think that this would help the truck to run smoother.....I don't think a picture would help make it easier to make one. The feed line is 33 inches fitting to fitting... and no I haven't put it on yet and apparently it is very difficult to get it tight enough not to leak...The hose is Parker Polyflex 2440D-03V37 4.7mm 3/16" 6033 Germany QC36169784.
Hope this helps. And Yes I'll probably try it when I get the other 11 things I need to find time to do on my truck...
The super cp3.4 is a CP3 that is 230%larger and flows 230% more fuel than a stock CP3.....4k or so from II. ks
Hope this helps. And Yes I'll probably try it when I get the other 11 things I need to find time to do on my truck...
The super cp3.4 is a CP3 that is 230%larger and flows 230% more fuel than a stock CP3.....4k or so from II. ks
#36
Registered User
I looked into making a mechanical rail pressure kit last year, but it's just not feasible due to the price & availability of the parts neeed... the HPCR fuel environment is way over typical hydraulic territory into the water-jet cutting pressure range!
Someday there'll be a hose/fitting assembly that won't be so hard to keep sealed...
Someday there'll be a hose/fitting assembly that won't be so hard to keep sealed...
Thread
Thread Starter
Forum
Replies
Last Post
powerstrokin03
3rd Gen High Performance and Accessories (5.9L Only)
1
02-15-2007 04:29 PM
EQUIPPRO
3rd Gen High Performance and Accessories (5.9L Only)
3
02-14-2007 09:04 PM
dodgeboy59td
3rd Gen High Performance and Accessories (5.9L Only)
8
01-06-2007 11:43 AM
deezilpwr
3rd Gen High Performance and Accessories (5.9L Only)
6
10-22-2006 12:45 AM