Adding a Dual Feed Line ON a Stock CP3???
#1
Chapter President
Thread Starter
Join Date: Sep 2005
Location: Tupelo, MS
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Adding a Dual Feed Line ON a Stock CP3???
Simple question guys. Will adding a dual feed line to a stock injector pump do anything to help performance???
Trending Topics
#8
i was able to turn my tst up one more setting by adding the dual feed line. that gave me a little more than a tenth in the 1/4 mile. so i would say about 30 hp or so. im sure you could get more from it with some tuning.
#10
Chapter President
Thread Starter
Join Date: Sep 2005
Location: Tupelo, MS
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's for the truck in my sig. I'm just trying to help out the fuel rail starvation problem somewhat, until I can save up for a Stage2 CP3 from Floor-It. Besides, I'm gonna need the dual lines anyways, so might as well get the line 1st if it's worth anything on a stock CP3.
The dual line is supposed to tie into the rail at the same location as a rail cap and supply more fuel without the use of a cap.
The dual line is supposed to tie into the rail at the same location as a rail cap and supply more fuel without the use of a cap.
#12
HOLY!!!! I just checked their site and they want $300 bucks for a high pressure line?!?!?!?!?!?!? it better add some HP for that price tag
http://www.industrialinjection.com/m...odge+Fuel+Pump
http://www.industrialinjection.com/m...odge+Fuel+Pump
#13
Registered User
Join Date: Oct 2006
Location: Harpers Ferry WV
Posts: 1,641
Likes: 0
Received 0 Likes
on
0 Posts
HOLY!!!! I just checked their site and they want $300 bucks for a high pressure line?!?!?!?!?!?!? it better add some HP for that price tag
http://www.industrialinjection.com/m...odge+Fuel+Pump
http://www.industrialinjection.com/m...odge+Fuel+Pump
#15