315's Priceless
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Alamana,Florida
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
315's Priceless
OK ya'll, I finally finished my 315's on H-2 Rims Project and they look great! My truck came with 245-70x17 and what a difference. If anyone wants to see, I posted some pictures in my gallery. What a bargain too, here's the low down:
H-2 Rims from E-Bay with shipping included $238.00
BFG 315's E-Bay local pickup no shipping $370.00
Fuel for trip to Clearwater to pick up tires $30.00
4-3/4" holesaw and arbor (don't recomend using) $47.00
Mount and Balance (Discount Tires) Great Job! $53.00
Making my Dodge Ram Hubcaps fit n/c
The way my truck looks now PRICELESS
Next I think I will lower the back, not sure yet which way I want to go, either taking out blocks or adding weight. Still need to tint windows and even though they stick out past the fenders (tires) I am NOT putting on flairs. I just think they take away from the rugged good looks of the truck. Have a great weekend everyone!
H-2 Rims from E-Bay with shipping included $238.00
BFG 315's E-Bay local pickup no shipping $370.00
Fuel for trip to Clearwater to pick up tires $30.00
4-3/4" holesaw and arbor (don't recomend using) $47.00
Mount and Balance (Discount Tires) Great Job! $53.00
Making my Dodge Ram Hubcaps fit n/c
The way my truck looks now PRICELESS
Next I think I will lower the back, not sure yet which way I want to go, either taking out blocks or adding weight. Still need to tint windows and even though they stick out past the fenders (tires) I am NOT putting on flairs. I just think they take away from the rugged good looks of the truck. Have a great weekend everyone!
#3
Registered User
Join Date: Aug 2002
Location: Northern Virginia
Posts: 8,803
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the 315 club Jerry! I too don't really want fender flares but when it rains you will find that those tires throw a lot of water onto the side of the truck and make a big mess. I'm thinking about making my own flares out of some thick rubber diamond plate matting. You really only need about 1.5" of extra coverage. My dad did this on a custom van he had before and it looked pretty good. I don't mind wasting money on my truck but some things are very overpriced like fender flares and brush guards and I just can't bring myself to spend the money....
#5
Registered User
Join Date: Apr 2004
Location: Chandler, AZ
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
JerryR, Why don't you reommend
drilling out the hubs yourself? I have a set of 4 mounted H2 rims sitting on my sideyard and a 4 3/4" metal hole saw ready to go. All I need to do is rent a Heavy Duty drill to complete the project.
Even though I only paid $535 for the H2 rims with 315/70/17 BFG's mounted, I would like to not have to buy a new set of rims.
(BTW, these things are cheap on ebay, like $40-50 a piece.)
Could you let me know what problems you had drilling them out. I called a few machine shops in the Phoenix area and they all told me I needed to get the tires dismounted before they could open up the hubs. I figured I would do it myself to save time and money. TIA.
Even though I only paid $535 for the H2 rims with 315/70/17 BFG's mounted, I would like to not have to buy a new set of rims.
(BTW, these things are cheap on ebay, like $40-50 a piece.)
Could you let me know what problems you had drilling them out. I called a few machine shops in the Phoenix area and they all told me I needed to get the tires dismounted before they could open up the hubs. I figured I would do it myself to save time and money. TIA.
#7
Registered User
Join Date: Apr 2004
Location: Chandler, AZ
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Got it, slow and easy. What is a Hole Hog and how does it differ from a regular HD drill?
Also, anyone have any advise in trimming my Dodge stock hub covers to fit the H2 rims?
Also, anyone have any advise in trimming my Dodge stock hub covers to fit the H2 rims?
Trending Topics
#8
Registered User
Sorry if this is a dumb question as I'm still waiting for my truck, but what is it that everyone likes so much about these H2 wheels vs. the stock premium aluminum wheels? It seems to me that the H2 wheels would be a lot harder to keep clean. Please enlighten me.
Thanks,
Neil
Thanks,
Neil
#9
Price was main reason for me along with the backspacing which doesn't cause the wheel to stick way out of the wheelwell. I also happen to like to look with the Dodge caps. Check my gallery for pics. As for how to cut the Dodge caps, search for a previous thread where I explained how I did my set.
Carl
Carl
#10
Anyone know of a place to get some 315's for a decent price, I know tirerack has them for $154, but I heard some place has them for $125? I need six, so I need them as cheap as possible.
thanks
thanks
#11
Registered User
Join Date: Apr 2004
Location: Chandler, AZ
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Neil
The main reason why I am going with the new rims (besides the fact I have the ugly chrome clad rims) is that the 315/70/17's are limited to 8.5" to 10" wide rims.
While many would argue that there is little difference between the 8.0" stock and 8.5" Hummer wheels, I don't want to find out at 75mph with 7500 pounds attached to my bumper.
While many would argue that there is little difference between the 8.0" stock and 8.5" Hummer wheels, I don't want to find out at 75mph with 7500 pounds attached to my bumper.
#12
DTR's 'Wrench thrower...' And he aims for the gusto...
Join Date: Oct 2003
Location: Smith Valley, NV (sometimes Redwood City, CA)
Posts: 2,668
Likes: 0
Received 3 Likes
on
2 Posts
NJMurvin,
To me the H2 wheels look better than the stock aluminum wheels. They are a little wider to accomodate the 315's, and they have the proper backspacing to not rub. And if you like them, you can get them easily for very little money. Later, if you break one you can always get another
CaughtinmyGrill,
The Hole Hawg is a very heavy duty right angle drill with a low speed gear and a second handle sticking out from the drill head. They also are variable speed. When drilling out these wheels all of these features are important. If you plan to do this project see my earlier post explaining the operation. It is easy if you do it right and carefully. Set the hole saw into the front of the wheel where it centers itself and drops in. Grip the drill and start slowly. The drill chatters around some but this is an advantage because the finished hole must be about 4 7/8 inch. I tried a different style drill but could not keep the hole saw from jumping out of the wheel center until I made a centering template. The Hole Hawg makes it easy. Of course, a lathe would be the best way, but we don't all have access to one. And, you can leave the tires on with the hole saw method.
Wetspirit
To me the H2 wheels look better than the stock aluminum wheels. They are a little wider to accomodate the 315's, and they have the proper backspacing to not rub. And if you like them, you can get them easily for very little money. Later, if you break one you can always get another
CaughtinmyGrill,
The Hole Hawg is a very heavy duty right angle drill with a low speed gear and a second handle sticking out from the drill head. They also are variable speed. When drilling out these wheels all of these features are important. If you plan to do this project see my earlier post explaining the operation. It is easy if you do it right and carefully. Set the hole saw into the front of the wheel where it centers itself and drops in. Grip the drill and start slowly. The drill chatters around some but this is an advantage because the finished hole must be about 4 7/8 inch. I tried a different style drill but could not keep the hole saw from jumping out of the wheel center until I made a centering template. The Hole Hawg makes it easy. Of course, a lathe would be the best way, but we don't all have access to one. And, you can leave the tires on with the hole saw method.
Wetspirit
#13
Registered User
Join Date: Aug 2002
Location: Northern Virginia
Posts: 8,803
Likes: 0
Received 0 Likes
on
0 Posts
Ramasaur,
I think many of us got our 315s from TireRack.com when they were running a special. Mine were $114.00 each plus shipping. The price seems to be going up and down a lot lately. Try Sams club. I know someone here got the tires for the same price as me and at Sams they include lifetime mounting and balancing. I spent $100.00 getting mine mounted and balanced and I got a break because my dad works there.....
I think many of us got our 315s from TireRack.com when they were running a special. Mine were $114.00 each plus shipping. The price seems to be going up and down a lot lately. Try Sams club. I know someone here got the tires for the same price as me and at Sams they include lifetime mounting and balancing. I spent $100.00 getting mine mounted and balanced and I got a break because my dad works there.....